You may also like
AMT 3 PORT 350-6 AWG SAME SIDE
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Group:
- Wire & Cable Management
- Product Type:
- AMT Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Electrical taps
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Black
- Product Material:
- Aluminum
Blackburn AMTS35063 – Frequently Asked Questions
1) What wire sizes does the Blackburn AMTS35063 multi-tap connector accept?
The AMTS35063 is a three-port AMT tap rated for conductors from 350 kcmil down to 6 AWG, so one connector covers a wide feeder-to-branch range without stocking separate sizes. All three ports enter from the same side of the block.
2) Can I use this Blackburn AMT tap on a 480V panel?
Yes. The AMTS35063 carries a 600 V rating, which covers 120/208, 277/480 and other common commercial distribution voltages up to 600 V.
3) Can I land three different wire sizes in one AMTS35063?
Yes, that is the point of a multi-tap block. Each of the three ports independently accepts anything in the 350 kcmil to 6 AWG range, so you can bring in a large feeder and tap off smaller branch conductors in the same connector.
4) What does "same side" mean on the AMTS35063, and when would I want it instead of a dual-side tap?
Same side means all three conductor ports enter the block from one face, so every cable is dressed in from the same direction. That suits a tap sitting against a gutter wall or at the end of a run where conductors all come from one way. If you need conductors approaching from opposite directions, a dual-side or opposite-entry AMT block is the better layout.
5) Is the Blackburn AMTS35063 aluminum body OK for copper conductors?
The body is aluminum, which on AMT-style mechanical taps is the standard dual-rated construction used with both copper and aluminum conductors. It is a UL-recognized connector under file E9809; verify the conductor marking stamped on the block matches the wire you are landing.
6) Does the AMTS35063 come insulated or do I need to cover it?
The AMTS35063 is a bare mechanical tap block, black finish, sold one per unit. Insulation is not part of the connector, so plan on a snap-on cover, insulating boot or tape/shrink build-up appropriate to the 600 V rating if the block is in a gutter or enclosure where live parts must be covered.
7) Do I get one connector or a pack when I order AMTS35063?
One. The selling unit is each, so for a three-phase-plus-neutral splice you would order four blocks.
8) Is the Blackburn AMTS35063 made in the USA?
Country of origin is the United States, which matters on public and institutional work carrying domestic-content requirements. The manufacturer part number to cite on the submittal is AMTS35063.
How fast can I get the Blackburn AMTS35063 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AMTS35063 come with a warranty?
Absolutely. The Blackburn AMTS35063 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AMTS35063?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AMTS35063 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.