You may also like
AMT OFFSET 2 PORT 1/0-14 WIRE
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Group:
- Wire & Cable Management
- Product Type:
- AMT Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Electrical taps
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Black
- Product Material:
- Aluminum
Blackburn AMTS4145 – Frequently Asked Questions
1) What wire range does the Blackburn AMTS4145 AMT connector accept?
The AMTS4145 is built for conductors from 1/0 through 14 AWG, so it covers a service tap down to small branch-circuit wire in the same connector. Both ports take wire within that range.
2) How many conductors can I land in the Blackburn AMTS4145?
Two. It is a 2-port offset AMT connector, so you get one tap per port. If you need more than two conductors landed at one point, step up to a higher port count in the AMT line rather than doubling wires in a port.
3) Is the Blackburn AMTS4145 rated for 600 volt circuits?
Yes, the AMTS4145 carries a 600 V rating, which covers standard commercial and industrial branch and feeder work. It is UL listed under file E9809.
4) Can I use the AMTS4145 on both copper and aluminum conductors?
The AMTS4145 body is aluminum, which is the standard construction for AMT-style dual-rated taps used on aluminum and copper building wire. Match the connector rating marked on the part to the conductor metal you are terminating before you make up the joint.
5) What does the offset design on this Blackburn AMT connector do for me in a tight panel?
The offset puts the two ports out of line with each other rather than stacked straight, which lets the tap conductors leave at staggered points instead of crowding the same axis. That helps when you are working inside a panel or gutter with limited bending room around a main run.
6) Is this an insulated connector or does it need to be taped or covered?
The AMTS4145 is a bare aluminum tap connector, black in color, not a pre-insulated device. Insulate the finished connection with an appropriate cover, tape, or heat shrink per the installation requirements for a 600 V joint.
7) Is the Blackburn AMTS4145 made in the USA for a Buy American job?
Country of origin on the AMTS4145 is the United States. For federally funded work, cite the part number AMTS4145 on your submittal along with the UL E9809 listing.
8) Is the Blackburn AMTS4145 sold individually or in a bag quantity?
It is sold each, so ordered quantity equals connector count. Useful when you are buying to a takeoff rather than stocking a bin.
How fast can I get the Blackburn AMTS4145 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AMTS4145 come with a warranty?
Absolutely. The Blackburn AMTS4145 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AMTS4145?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AMTS4145 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.