You may also like
Anchors 1-1/4 Hwh Cd Walldog Ancr St-zn (Clam100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Clamshell
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics MWDH114K – Frequently Asked Questions
1) What is the Metallics MWDH114K Walldog anchor and what head does it take?
It's a 1-1/4 inch Walldog type masonry anchor from Metallics with a hex washer head, zinc plated steel, driven with a nut driver or socket rather than a bit in a recess. The hex washer head gives you a bearing surface against the fixture, so it's the common choice for mounting straps, conduit clamps, and boxes to concrete or block.
2) Do I need a plastic or lead shield with the Metallics MWDH114K anchor?
No separate shield or plug. A Walldog style anchor is driven straight into a pre-drilled hole in concrete, block, or brick and cuts its own thread, so the only steps are drill and drive. That is the practical difference from a sleeve or shield anchor, which needs the insert set first.
3) Is a 1-1/4 inch Walldog long enough for mounting conduit straps to concrete?
At 1-1/4 inch overall, you lose the thickness of whatever you are fastening to embedment. A one-hole strap or a thin bracket leaves roughly an inch in the masonry, which is a normal working embedment for light electrical mounting. Thicker standoffs, furring, or a wood nailer will eat too much of it, and you want a longer Walldog for those.
4) How many Walldog anchors come in a Metallics MWDH114K pack?
They ship 100 to a clamshell pack, so one pack covers a full day of strap and box mounting without reordering. If you are standardizing a building's electrical rough-in, buying by the clamshell keeps one anchor length across every opening.
5) Are these zinc plated Walldog anchors suitable for outdoor or damp locations?
The MWDH114K is steel with a zinc plating, which is a dry interior finish. Zinc plate handles indoor humidity and construction exposure, but for permanently wet, exterior, or coastal work you want a stainless or hot dip galvanized masonry fastener instead.
6) Where does the Metallics MWDH114K fit in an electrical fastener package?
It is the masonry anchor line item on an electrical rough-in, used for securing conduit straps, device boxes, panel backing, and raceway to concrete and block. You still need the matching carbide drill bit sized to the anchor and a hex driver; neither is included with the anchors.
How fast can I get the Metallics MWDH114K delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MWDH114K come with a warranty?
Absolutely. The Metallics MWDH114K is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MWDH114K?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MWDH114K from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.