You may also like
Anchors 1-1/4 Pn Sd Walldog Ancr St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics MWDS114J – Frequently Asked Questions
1) What is the Metallics MWDS114J Walldog anchor and what length is it?
It's a 1-1/4 inch Walldog type masonry anchor from Metallics, pan head with a slotted drive, in zinc plated steel. One part number, MWDS114J, sold as a jar of 100. Walldog anchors drive straight into a pre-drilled hole in masonry, block, brick or concrete without a separate plastic or lead shield, so the anchor and the screw are the same piece.
2) Will a 1-1/4 inch Walldog anchor hold a conduit strap or box on concrete block?
Yes for light electrical attachments. At 1-1/4 inches overall, the thread engages roughly an inch of base material once you account for the thickness of a strap or box ear, which is normal embedment for one-hole straps, 4-square boxes and small brackets in block or concrete. For heavier loads such as panels, cable tray or strut, step up to a longer anchor or a wedge type.
3) How many anchors come in a jar of Metallics MWDS114J?
100 pieces per jar. That's a quantity sized for a single trade: mounting a run of conduit straps, device boxes, or panel backing in masonry. If you're standardizing a maintenance stock, the jar keeps them contained better than a bag on a cart.
4) Is a zinc plated Walldog anchor OK for outdoor or damp locations?
The MWDS114J is zinc plated steel, which is a coating for dry interior and protected use. For exterior walls, parking structures, or anything exposed to weather or washdown, go to a stainless or mechanically galvanized anchor instead. Zinc plating will corrode in sustained moisture.
5) What driver do I need for the MWDS114J Walldog anchor?
It has a slotted pan head, so it drives with a flat blade bit, not a Phillips or square. Keep the drill or impact on a lower speed, since a slotted bit cams out of the head easily under high torque.
6) Do I need a plastic plug or shield with Metallics Walldog anchors?
No. The Walldog is a one piece screw anchor, so you drill the hole and drive it, with no plastic insert, lead shield or expansion sleeve to set first. That is the main reason crews choose it over an anchor and screw combination for repetitive masonry fastening.
How fast can I get the Metallics MWDS114J delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MWDS114J come with a warranty?
Absolutely. The Metallics MWDS114J is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MWDS114J?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MWDS114J from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.