Metallics WAKJ19SS Anchors 1/4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$131.66
$109.94

Metallics WAKJ19SS Anchors 1/4 Yel Plas Wall Ancr Kit, 1 (Jar 200)

(No reviews yet) Write a Review

Model: WAKJ19SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$131.66
$109.94
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors 1/4 Yel Plas Wall Ancr Kit, 1 (Jar 200)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Anchors

Metallics WAKJ19SS – Frequently Asked Questions

1) What size anchor is in the Metallics WAKJ19SS wall anchor kit?
The Metallics WAKJ19SS kit is built around 1/4 inch yellow plastic wall anchors, supplied in a jar of 200. It's the plastic expansion type you set into a drilled hole in drywall, plaster, or masonry, then drive a screw into so the body expands against the hole wall.
2) Are plastic wall anchors like these strong enough to hang a TV or heavy cabinet?
No. The 1/4 inch plastic expansion anchors in the WAKJ19SS kit are for light duty work, mounting conduit straps, raceway, small boxes, signage, cover plates, and similar. For a television mount, cabinet, or grab bar you want a toggle, a strap toggle, or a lag into solid framing instead.
3) How many anchors come in the Metallics WAKJ19SS jar?
200 per jar, ordered as model WAKJ19SS. The jar pack is the usual way an electrician or maintenance tech buys these, since a single device or strap job uses two to four and the jar keeps a service van stocked without repeat trips to the counter.
4) Do I need a specific drill bit size for the 1/4 inch yellow plastic anchors?
Yellow plastic anchors are sized by the anchor body, and the hole has to match the anchor diameter so the sleeve grips as the screw expands it. Match your masonry or drywall bit to the 1/4 inch anchor body, drill to the full anchor length so the anchor seats flush, and set the screw only until it is snug. Overdriving spins the anchor in the hole and ruins the hold.
5) Is the Metallics WAKJ19SS kit suitable for electrical work?
Yes, it is stocked as electrical fastening hardware, and plastic wall anchors in this size are the common way electricians fasten conduit straps, small junction boxes, and low voltage devices to drywall or block when there is no stud behind the hole.
How fast can I get the Metallics WAKJ19SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAKJ19SS come with a warranty?
Absolutely. The Metallics WAKJ19SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAKJ19SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAKJ19SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.