You may also like
Anchors 1/4X 1-1/4 Hmmr Nail-In Ancr SS (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JNA1414SS – Frequently Asked Questions
1) Are these nail-in anchors stainless steel, and can I use them outdoors?
Yes, the JNA1414SS is the stainless steel version of the 1/4 inch nail-in anchor, which is why electricians specify it for exterior walls, damp mechanical rooms, parking structures and coastal work where a zinc-plated nail-in would rust and stain the concrete.
2) Will a 1-1/4 inch nail-in anchor be long enough for my strap?
At 1-1/4 inches overall, the usable embedment is the 1-1/4 inches minus the thickness of whatever you are fastening. A sheet metal conduit strap or clip leaves most of the anchor in the concrete; a thicker bracket or a strut clip does not, and you should move to a longer nail-in or a different anchor type. Also budget for the drill depth being slightly deeper than the anchor so dust has somewhere to go.
3) How many anchors come in a jar of Metallics JNA1414SS?
100 anchors per jar. The jar pack keeps the 1/4 x 1-1/4 nail-ins together on a cart or in a gang box rather than loose in a bag, which matters when you are setting straps and clips all day.
4) What is a hammer nail-in anchor used for on an electrical job?
It is a one-shot fastener for light-duty attachment to concrete, block or brick: one-hole straps, conduit clips, box mounting ears, strut clips, ground bars. There is no torquing and no setting tool, just drill and hammer. For anything carrying real load or subject to vibration, step up to a wedge or sleeve anchor instead, and for hollow block face use a toggle or screw anchor rated for hollow base material.
5) Can nail-in anchors be removed once they are hammered in?
Not cleanly. The 1/4 x 1-1/4 nail-in is a permanent-set fastener, so the pin has to be drilled out or the head sheared off to get a fixture back. If you expect to re-open the connection, pick a removable screw-type or sleeve anchor for that location instead.
6) What is the Metallics part number for the 1/4 x 1-1/4 stainless nail-in anchor?
JNA1414SS. That is the manufacturer part number, covering the 1/4 inch by 1-1/4 inch stainless nail-in anchor in the 100-count jar.
How fast can I get the Metallics JNA1414SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JNA1414SS come with a warranty?
Absolutely. The Metallics JNA1414SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JNA1414SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JNA1414SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.