You may also like
Anchors .22 A Caliber Yellow Loads (Clam 100)
Manufacturer Resources
Product Specs
- Pack Type:
- Clamshell
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics M50502 – Frequently Asked Questions
1) What are Metallics M50502 .22 caliber yellow loads used for?
These are .22 caliber powder loads for a powder-actuated fastening tool, used to drive pins into concrete or steel. Yellow is the color code for the power level, so the loads must match both the tool and the pin and base material you are shooting into. Model number is M50502 and they come 100 to a clamshell.
2) Do the Metallics M50502 yellow loads come with pins or fasteners?
No. The M50502 clamshell is 100 powder loads only. Drive pins or threaded studs are ordered separately, along with a .22 caliber powder-actuated tool rated for yellow-level loads.
3) Will .22 caliber yellow loads work in any powder actuated tool?
Only in a .22 caliber tool that accepts single loads of this type and is rated for the yellow power level. Powder-actuated tools are caliber specific, so a .25 or .27 caliber tool will not take the M50502 loads. Check the caliber stamped on your tool before ordering.
4) How many .22 loads are in a pack of Metallics M50502?
One hundred loads per clamshell pack. That is the count an electrician typically burns through on a day of hanging strut, conduit clamps, and box mounts on concrete deck.
5) Is the yellow load the right power level for shooting into concrete deck?
Yellow sits in the middle of the standard powder load color scale, which runs from the lightest loads up through yellow to the heaviest. Standard practice is to start with a lower power level on a test shot, then step up until the pin seats flush without overdriving. If a yellow load overdrives into soft concrete, move down a level; if the pin stands proud in hard concrete or steel, move up.
6) Are the Metallics M50502 loads a consumable for electrical rough-in work?
Yes, that is the usual application. Metallics catalogs the M50502 as an electrical fastening item, and the loads get consumed one per pin when anchoring conduit straps, strut, box brackets, and hangers to concrete or structural steel.
How fast can I get the Metallics M50502 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics M50502 come with a warranty?
Absolutely. The Metallics M50502 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics M50502?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics M50502 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.