Metallics M50023 Anchors .300"...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24

Metallics M50023 Anchors .300" Hd Dr Pin w3/4" Blk Shk .145 (Jar 100)

(No reviews yet) Write a Review

Model: M50023
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors .300" Hd Dr Pin w3/4" Blk Shk .145 (Jar 100)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Anchors

Metallics M50023 – Frequently Asked Questions

1) What size drive pin is the Metallics M50023 and how many come in a jar?
The M50023 is a .300 inch head drive pin with a 3/4 inch black shank at .145 shank diameter, packed 100 pins to a jar. That pack size is sized for a day's worth of conduit strap, clip, or box fastening into masonry and concrete rather than a bulk-box buy.
2) Are these Metallics drive pins the right fastener for mounting conduit straps to concrete?
Yes, that is the job this pin is made for. The M50023 is a .145 shank drive pin with a 3/4 inch penetration length, which suits surface-mounting straps, clips, and small boxes to concrete or block. The 3/4 inch shank governs how deep it sets, so pick a longer pin if what you are fastening through is thicker than the head will clamp.
3) What does the .300 head on the M50023 drive pin do for me?
The .300 inch head is the bearing surface that holds the strap or clip against the wall. It is wider than the .145 shank, so it clamps the item without needing a separate washer. If the hole in the part you are fastening is larger than .300 inch, the head will pull through and you need a washered pin instead.
4) Is the Metallics M50023 a drive pin or an expansion anchor?
It is a drive pin, not an expansion-style anchor. There is no sleeve to expand and no hole to pre-drill for a plug: the .145 shank is driven directly into the base material with a powder actuated or hammer drive tool. If you need a removable, resettable fastening, use a sleeve or screw anchor instead.
5) Which Metallics part number should I order for a .145 x 3/4 inch black shank drive pin?
Order Metallics M50023. That number covers the .300 head, 3/4 inch black shank, .145 diameter drive pin in the 100 count jar, and it is the only configuration carried under that part number.
How fast can I get the Metallics M50023 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics M50023 come with a warranty?
Absolutely. The Metallics M50023 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics M50023?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics M50023 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.