You may also like
Anchors .300" Head Drive Pins W/ 7/8" (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics M50094 – Frequently Asked Questions
1) What size drive pins come in the Metallics M50094 pack?
The M50094 drive pins have a .300 inch head and a 7/8 inch pin length, and they come packed 100 to a jar.
2) Are the Metallics .300 head drive pins meant for powder actuated tools?
Yes. A .300 inch head drive pin is the powder actuated fastener style, driven into concrete or steel with a powder tool rather than set with a hammer and expansion sleeve. The .300 head is the shank head diameter your tool's guide and washer must match, so confirm your tool takes .300 head pins before ordering.
3) Can I use these drive pins in hollow block or drywall?
No. A drive pin needs solid base material, poured concrete or structural steel, to hold. In hollow block webs, brick or drywall it will blow through or spin free. For those substrates use a screw anchor, toggle or sleeve anchor instead of a .300 head drive pin.
4) How many drive pins do I get in one order of Metallics M50094?
One jar, 100 pins. If you are pinning conduit straps or box mounts across a building, figure your pin count per opening and order jars accordingly, since the 100 count is the pack unit.
5) Do I need anything besides the pins to use Metallics M50094?
The jar contains the pins only. You supply the powder actuated tool and the correct power load for your base material, and the pins must match your tool's .300 head guide. No washers, sleeves or expansion hardware are included or needed, since a drive pin holds by friction in the hole it creates.
6) Are Metallics M50094 drive pins an electrical trade item or general construction?
They are catalogued for electrical work, and that is the typical use: fastening conduit straps, one hole clips, device boxes and hanger hardware to concrete and structural steel. The fastener itself is not electrical specific, so general contractors use the same pin for attaching furring, track and light framing accessories.
How fast can I get the Metallics M50094 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics M50094 come with a warranty?
Absolutely. The Metallics M50094 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics M50094?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics M50094 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.