You may also like
Anchors 3/16 Red Plas Wall Ancr Kit, 8 (Clam 200)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics WAK16H – Frequently Asked Questions
1) What size drill bit and screw do the Metallics WAK16H red plastic wall anchors use?
The WAK16H is a 3/16 inch red plastic wall anchor kit, so the hole is drilled with a 3/16 inch bit and the anchor is paired with a #8 screw. Drill clean and flush, tap the anchor in until the collar seats against the wall face, then drive the screw to expand it against the back of the board.
2) Can I use these red plastic anchors in concrete or brick, or only drywall?
Ribbed plastic expansion anchors like the WAK16H work in hollow drywall and plaster and also in solid masonry such as concrete, block, and brick, as long as the 3/16 inch hole is drilled to full depth and the anchor bottoms out. For heavy overhead loads or anything structural, a steel sleeve or wedge anchor is the right call instead.
3) How many anchors come in the Metallics WAK16H kit?
It is a 200 piece clamshell pack of 3/16 inch red plastic wall anchors. That quantity suits an MRO cart or a van stock item rather than a one-off repair, which is how most property maintenance and electrical crews buy them.
4) What is the Metallics part number for the 3/16 red plastic wall anchor kit?
Order it as Metallics WAK16H. That single part number covers the 3/16 inch red plastic anchor kit in the 200 piece clamshell, and there are no finish or size options to specify with it.
5) Are these the right anchors for mounting device boxes, straps, and low voltage brackets on drywall?
Yes for light electrical work. The WAK16H 3/16 inch plastic anchors with #8 screws are the common fastener for surface boxes, cable straps, low voltage rings, and small brackets on drywall or plaster. They are not intended to carry a fixture that puts real pull-out load on the wall board, such as a heavy panel or a wall hung enclosure.
How fast can I get the Metallics WAK16H delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAK16H come with a warranty?
Absolutely. The Metallics WAK16H is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAK16H?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAK16H from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.