You may also like
Anchors 3/16 Red Plas Wall Ancr Kit, 8 (Jar 200)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics WAKJ16H – Frequently Asked Questions
1) What size drill bit and screw do I use with the Metallics WAKJ16H red plastic wall anchors?
The WAKJ16H kit is built around a 3/16 inch anchor paired with a #8 screw, so a 3/16 inch bit is what you drill the hole with. Drill clean, tap the red plastic anchor flush with the wall surface, then drive the #8 screw to expand it.
2) Will these red plastic anchors hold in drywall, or do I need a toggle?
Expansion anchors like the 3/16 inch red plastic ones in the WAKJ16H kit work best when the hole has solid material around it: plaster, masonry, brick, block, or concrete. In hollow drywall they only grip the thin face of the board, so they suit light loads such as a device plate, a small raceway clip, a smoke detector base, or a low voltage bracket. For anything with real weight cantilevered off the wall, use a toggle or a self drilling hollow wall anchor instead.
3) How many anchors come in the Metallics WAKJ16H jar?
It ships as a 200 piece jar. That is a bulk wall anchor kit sized for a service van or an MRO stockroom rather than a single job, which is why it is packaged in a resealable jar instead of a blister card.
4) Are screws included with the Metallics WAKJ16H wall anchor kit?
The kit is specified as a 3/16 inch red plastic anchor with a #8 screw, so plan on a #8 as the mating fastener. If you are mounting to a finished surface or need a specific head style, pan head versus flat head, order those screws to suit the item you are hanging and match the length to your fixture thickness plus the anchor depth.
5) What is the manufacturer part number for the Metallics 3/16 red plastic wall anchor jar?
Order it as Metallics WAKJ16H. That single part number covers the complete 200 piece jar of 3/16 inch red plastic anchors for #8 screws, so there are no size or finish options to specify when you place the order.
How fast can I get the Metallics WAKJ16H delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAKJ16H come with a warranty?
Absolutely. The Metallics WAKJ16H is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAKJ16H?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAKJ16H from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.