You may also like
Anchors 3/16 Spring Toggle Hd SS (Jar 50)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics J1592SS – Frequently Asked Questions
1) What screw size does the Metallics J1592SS spring toggle anchor take?
The J1592SS is a 3/16 spring toggle, so it pairs with 3/16 inch machine screws. Spring toggles work in hollow materials, drywall, hollow block, plaster or hollow tile: you drill a hole large enough for the folded wings to pass through, push them in, and the spring snaps them open behind the wall so the load bears on the back face rather than the facing material.
2) Are these toggle anchors stainless steel for damp or outdoor electrical work?
Yes. The Metallics J1592SS is a stainless steel spring toggle, which is the reason to pick it over a plain or zinc plated toggle when you are hanging boxes, strut, or conduit supports in damp locations, exterior soffits, coastal sites, or washdown areas where a plated toggle would bloom rust at the wall face.
3) How many anchors come in a jar of Metallics J1592SS?
Each jar holds 50 of the 3/16 stainless spring toggles. The jar pack is the usual way these go onto a service van or into an MRO crib: one container per size so an electrician is not digging loose toggles out of a bin, and 50 is enough to cover a run of device boxes or fixture hangers on hollow wall without reordering mid job.
4) Should I use a spring toggle or a plastic expansion anchor in drywall?
Plastic expansion anchors grip the drywall itself, so they pull out as the gypsum crumbles and they are only sensible for light, static items. A spring toggle like the J1592SS spans the cavity and clamps against the back of the board, which is what you want for anything with weight or vibration, fixture hangers, raceway, strap supports. The tradeoff: the toggle needs clear cavity space behind the wall and the wings are lost in the cavity if you ever back the screw all the way out.
5) Is the J1592SS sold with the screws included?
Order it as the 3/16 spring toggle assembly, jar of 50. Before you leave the counter, confirm you also have 3/16 machine screws at the length your fixture and wall thickness need, since the screw length has to cover the board thickness plus whatever you are mounting and still leave enough thread to draw the wings tight.
6) What is the Metallics part number for the 3/16 stainless spring toggle?
Metallics catalogues it as J1592SS, which is both the model and the manufacturer part number, so a distributor can order against that single designation. The SS suffix is the stainless material; the 3/16 is the screw size the toggle accepts.
How fast can I get the Metallics J1592SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics J1592SS come with a warranty?
Absolutely. The Metallics J1592SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics J1592SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics J1592SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.