You may also like
Anchors 500 3/8 x 3-1/2 Wdg SS (Box 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics TS33121SSD – Frequently Asked Questions
1) Are these Metallics anchors stainless steel, and can I use them outdoors?
Yes, the TS33121SSD is a stainless steel wedge anchor. That is the reason to choose it over a zinc plated carbon steel anchor: exterior slabs, parking structures, rooftop equipment curbs, wash-down areas, and anywhere a plated anchor would rust-stain the concrete or lose section over time. Pair it with stainless hardware so you are not setting up galvanic corrosion at the nut.
2) Can I use a wedge anchor like this in block, brick, or hollow-core slab?
No. Wedge anchors are for solid, poured concrete only. The expansion clip needs a solid, uniform hole wall to grab, so in hollow block, brick, or hollow-core plank it will spin or pull out. For those bases use a sleeve anchor, a screw anchor rated for masonry, or a toggle through the hollow cell. Stick to the 3/8 x 3-1/2 stainless wedge where you are shooting into a solid slab, footing, or concrete wall.
3) How many anchors come in a box of Metallics TS33121SSD?
They ship 100 pieces to a box, packaged as a box rather than a bag or bulk carton. Each anchor comes with its nut and washer assembled, which is standard on wedge anchors, so there is nothing else to order to set them.
4) What is a wedge anchor used for on electrical work?
It is the standard mechanical anchor for fastening into a concrete deck, slab, or wall: strut and trapeze hangers, panel and transformer mounting, generator and rooftop unit bases, conduit standoffs, and equipment pads. The TS33121SSD is the 3/8 x 3-1/2 inch stainless version, carried as electrical fastening hardware, and the stainless grade is what makes it the choice for exterior and corrosive locations.
5) What is the ordering part number for the 3/8 x 3-1/2 stainless wedge anchor from Metallics?
Order Metallics TS33121SSD. One model covers it, a 3/8 x 3-1/2 inch stainless wedge anchor supplied 100 to a box, so there is no finish or length option to pick on top of the number.
How fast can I get the Metallics TS33121SSD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS33121SSD come with a warranty?
Absolutely. The Metallics TS33121SSD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS33121SSD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS33121SSD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.