You may also like
Anchors 7/8 x 8 Wdg St-zn (Box 10)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Anchors
- Sub Division:
- Electrical-E H2
- Department:
- Fasteners
- Product Subgroup:
- Concrete and Masonry Anchors
- Product Type:
- Wedge Anchor
Metallics TS788D – Frequently Asked Questions
1) Will a 7/8 x 8 inch wedge anchor work in hollow block or brick?
No. Wedge anchors like the Metallics TS788D work by expanding a clip against the wall of a drilled hole and need solid, poured concrete to develop their hold. In hollow CMU, brick, or grout-filled block the clip has nothing continuous to bite into. Use a sleeve anchor, a screw anchor rated for masonry, or an adhesive anchor with a screen tube in hollow base material.
2) Is the TS788D anchor zinc plated or stainless?
Carbon steel with a zinc plating, which is the standard finish for interior and dry-location concrete anchoring. Zinc plated steel is not a corrosion-resistant finish for wet, coastal, or chemically exposed work, so for exterior or washdown areas specify a stainless wedge anchor instead.
3) What is the 8 inch length on the TS788D for?
The 8 inch overall length covers thick fixtures and deep embedment, 7/8 inch anchors at that length are typically used for heavy equipment bases, column base plates, steel bollards, pipe supports, and large strut or rack anchoring. Remember the length has to cover the thickness of what you are fastening plus the washer and nut, with the balance embedded in the concrete, so an 8 inch anchor through a thin plate buries most of its length.
4) How many anchors come in a box of Metallics TS788D?
Ten anchors per box, packaged as a box rather than loose or bulk. For a job needing more than ten 7/8 inch anchors, order in multiples of the box.
5) What is the Metallics part number to order for a 7/8 by 8 inch zinc wedge anchor?
TS788D is the Metallics part number, and it is the only model on the item, so there is no finish or length choice to specify when ordering.
How fast can I get the Metallics TS788D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS788D come with a warranty?
Absolutely. The Metallics TS788D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS788D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS788D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.