You may also like
Anchors 8 X 1-1/4 S-Dr Wall Ancr Kit Z (Box 1000)
Manufacturer Resources
Product Specs
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics ZSTU1M – Frequently Asked Questions
1) What size screws come with the Metallics ZSTU1M wall anchor kit?
The ZSTU1M is a #8 x 1-1/4 inch self-drilling wall anchor kit, so the anchors are sized for #8 screws and the kit is built around that 1-1/4 inch anchor length. It ships as a box of 1,000.
2) Do I need to drill a pilot hole for the Metallics ZSTU1M anchors?
No. These are self-drilling drywall anchors, so the anchor threads cut their own hole in the board with a screwdriver or a driver on low speed. No pilot hole and no hammering.
3) Will self-drilling wall anchors like the ZSTU1M work in plaster, masonry, or concrete?
Self-drilling threaded anchors are for hollow gypsum board only. In plaster, block, brick, or concrete the threads will not cut and the anchor will shatter or spin out, so you need a masonry anchor (sleeve, wedge, or plastic expansion anchor with a hammer-drilled hole) instead. On drywall the ZSTU1M #8 x 1-1/4 anchor is the right tool.
4) Are screws included with the Metallics ZSTU1M anchor kit, or do I order those separately?
It is sold as a kit, so the box covers the anchor side of the job in #8 x 1-1/4. Plan your screw length around the fixture you are hanging: the anchor accepts a #8 screw, and the screw has to be long enough to pass through whatever you are mounting and still fully engage the anchor body.
5) What is the Metallics part number for the #8 x 1-1/4 self-drilling drywall anchor box?
Order it as Metallics ZSTU1M. That single model number covers the #8 x 1-1/4 self-drilling wall anchor kit in the 1,000-piece box, with a zinc plated finish.
6) Is a 1,000-piece box of #8 self-drilling anchors practical for an electrical or MRO stockroom?
That is exactly what the bulk box is for. The ZSTU1M comes 1,000 to a box in a single #8 x 1-1/4 size, which is the standard sizing for mounting device boxes, low-voltage brackets, conduit straps, signage, and fixture plates to drywall. Buying one size in bulk keeps a cart or a crib standardized instead of carrying four partial packs.
How fast can I get the Metallics ZSTU1M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics ZSTU1M come with a warranty?
Absolutely. The Metallics ZSTU1M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics ZSTU1M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics ZSTU1M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.