You may also like
ANTI-ROT 1CNDTR 1HL MNT 600-2 1/2B
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Number Of Conductors:
- 1
- Product Group:
- Wire & Cable Management
- Product Type:
- Anti-Rotational Mechanical Connector
- Selling Unit Of Measure:
- each
- Spacing:
- 1/2 in
- Standards:
- UL E9809
- Surface Finishing:
- Tin-Plated
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Aluminum
Blackburn ADR60AR – Frequently Asked Questions
1) What is the Blackburn ADR60AR connector used for?
It's a one-conductor anti-rotational mechanical connector, used to terminate a single conductor to a flat surface such as a bus bar, panel pad, or equipment lug pad. The anti-rotational design keeps the connector from twisting on its mounting bolt as the conductor is torqued or pulled, which is what keeps the termination tight in a panel or enclosure. Body is aluminum with a tin-plated finish, and it's sold individually.
2) How many mounting holes does the ADR60AR have and what is the hole spacing?
Single-hole mount, with 1/2 inch spacing on the mounting pad. That matters when you're laying out multiple connectors on the same bar or pad: one bolt per connector, so the bolt pattern in the bus has to line up with a single hole rather than a two-hole pattern. If your existing bus is drilled for a two-hole (double-bolt) lug pattern, this is not a drop-in for it.
3) Is the Blackburn ADR60AR UL listed?
Yes. It carries UL file E9809. For inspection on commercial and institutional work, that's the reference an AHJ or electrical inspector will want for the mechanical connector itself.
4) Can a tin-plated aluminum connector like the ADR60AR be used on copper conductors?
The ADR60AR body is aluminum with a tin plating, which is the standard construction for connectors intended to be used on either metal, since the tin barrier keeps the aluminum from contacting copper directly. Confirm the conductor marking stamped on the body or its carton before installing on copper, because the acceptable conductor types and sizes are marked on the connector itself under its UL listing.
5) Do I need one ADR60AR per conductor, or can it take two cables?
One conductor per connector. The ADR60AR is a single-conductor device, so a three-phase-plus-neutral termination needs four of them. They ship each, not in pairs or kits, so order the count you actually need for the panel.
6) What is the exact part number and country of origin for the Blackburn anti-rotational connector?
Manufacturer part number is ADR60AR, made by Blackburn, country of origin Mexico. That's the number to quote for a distributor order or a submittal, since Blackburn's ADR family runs several conductor ranges and mounting configurations under similar designations.
How fast can I get the Blackburn ADR60AR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ADR60AR come with a warranty?
Absolutely. The Blackburn ADR60AR is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ADR60AR?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ADR60AR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.