Arlington Industries NMLT5090B...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$741.94
Arlington Industries NMLT5090BL Zero to 90® Liquidtight PVC Connector, 1/2", Pack of 100

Arlington Industries NMLT5090BL Zero to 90® Liquidtight PVC Connector, 1/2", Pack of 100

(No reviews yet) Write a Review

Model: NMLT5090BL

In Stock (leaves warehouse same day if ordered before 3pm ET)

$741.94
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Arlington Industries NMLT5090BL Zero to 90® Liquidtight PVC Connector, 1/2"

The Arlington Industries NMLT5090BL is part of the Zero to 90® family of adjustable liquidtight connectors, engineered to connect 1/2" liquidtight flexible conduit to enclosures, boxes, and equipment at any angle from straight through a full 90° bend. Molded from non-metallic PVC, this connector eliminates the need to stock separate straight and 90° elbow fittings, simplifying inventory while speeding up installation. Whether installers are landing on a straight knockout or need to route conduit around an obstruction, the NMLT5090BL adapts on the job site without extra fittings. The connector body carries an overall depth of 90mm, making it a compact, versatile solution for electricians working in tight or unpredictable routing conditions.

Key Features

  • Trade Size: 1/2" connector sized to accept 1/2" liquidtight flexible conduit for a secure, code-compliant termination.
  • Zero to 90® Adjustability: Articulates from a straight 0° run to a full 90° bend, letting installers field-adjust the angle instead of stocking a fixed-angle fitting for every routing scenario.
  • Non-Metallic PVC Construction: Molded PVC body resists corrosion and is lightweight compared to metallic connectors, suited for damp or corrosive environments.
  • Liquidtight Connection: Designed to maintain a liquidtight seal between the conduit and enclosure, helping keep moisture and contaminants out of the wiring system.
  • Compact Dimension: 90mm connector body depth suited for use in confined enclosure spaces and equipment housings.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Liquidtight Flexible Conduit Connections
  • Outdoor and Wet-Location Equipment Hookups
  • Motor, Pump, and HVAC Equipment Wiring
  • Panel and Enclosure Conduit Entries
  • Renovation and New Construction Electrical Work

Why Arlington Industries?

Arlington Industries builds the NMLT5090BL from durable non-metallic PVC and engineers the Zero to 90® connector line to reduce the number of SKUs electricians need to carry on the truck. By combining a liquidtight connector, a straight fitting, and a 90° elbow into one adjustable, code-compliant part, Arlington helps installers work faster on 1/2" liquidtight flexible conduit runs without sacrificing a secure connection. This adjustable, non-metallic design also helps reduce corrosion concerns compared to metallic liquidtight connectors when installed in damp or chemically exposed environments, supporting reliable, code-compliant performance for professional electrical work.

Manufacturer Resources

Product Specs

list_batch:
ARL-20260918
Product Type:
Connector
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Liquidtight Conduit & Fittings
Product Size:
1/2"
Pack size (unit):
100
Product Height:
2.324 in
Product Color:
Black
Listing:
UL, CSA
Country Of Origin:
United States
Product Width:
2.387 in

Arlington Industries NMLT5090BL – Frequently Asked Questions

1) Do I still need to stock separate straight and 90 degree liquidtight connectors if I carry this one?
No. The Zero to 90 connector articulates anywhere from a straight 0 degree run through a full 90 degree bend, so one part covers what a straight fitting and a 90 degree elbow would normally cover. That is the whole point of the design, and it is why electricians use it to cut the number of fittings on the truck.
2) Is this a metal or plastic liquidtight connector, and which should I use outdoors?
It is non-metallic, molded from PVC. That makes it lighter than a die-cast or steel liquidtight connector and it will not corrode, which is why it suits damp, wet-location, and chemically exposed hookups like pumps, motors, and rooftop HVAC. If your spec or inspector calls for a metallic fitting that carries an equipment ground path through the connector body, use a metallic liquidtight connector instead.
3) Can I adjust the angle on this connector after it is installed on the box?
The angle is field-set rather than fixed at the factory. You land the connector on the knockout and set it anywhere between straight and 90 degrees to clear an obstruction or aim the conduit run, instead of ordering a fixed-angle elbow for each routing condition.
4) How many connectors come in a pack of the Arlington NMLT5090BL?
Sold 100 to the pack. That is a contractor or distributor quantity, so for a single equipment hookup you are buying far more than the job needs, and for a multi-unit or new-construction rough-in it is the right buy.
5) Will this connector fit in a tight enclosure or a crowded panel entry?
The connector body carries an overall depth of 90mm, which Arlington calls out for use in confined enclosure spaces and equipment housings. Check your available clearance inside the can against that figure before you commit, particularly on small junction boxes and equipment covers.
6) Does the NMLT5090BL keep water out of the enclosure?
It is a liquidtight fitting, built to seal between the flexible conduit and the enclosure so moisture and contaminants stay out of the wiring. That is what makes it usable on outdoor and wet-location equipment hookups rather than a plain flex connector.
7) What is the exact Arlington part number to order for the 1/2 inch Zero to 90 PVC connector?
Arlington Industries MPN NMLT5090BL, 1/2 inch, from the Zero to 90 liquidtight PVC line. There is one size on that number, so the part number alone fully identifies what you are getting.
How fast can I get the Arlington Industries NMLT5090BL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Arlington Industries NMLT5090BL come with a warranty?
Absolutely. The Arlington Industries NMLT5090BL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Arlington Industries NMLT5090BL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Arlington Industries NMLT5090BL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!