Arlington Industries NMLT9075BL 90° Non-Metallic Liquidtight Connector

Arlington Industries NMLT9075BL 90° Non-Metallic Liquidtight Connector, 3/4"

Arlington Industries' NMLT9075BL is a 90° non-metallic liquidtight connector purpose-built for 3/4" liquidtight flexible conduit (LFNC) installations. Where a straight-through fitting can't clear an obstruction or fit inside a tight enclosure, this L-shaped connector lets the conduit run turn a corner without adding a separate elbow. Molded from a non-metallic, corrosion-resistant material, the NMLT9075BL is designed to hold up in wet, damp, or corrosive environments where standard metallic fittings would be prone to rust or degradation. The connector's liquidtight design creates a secure seal at the point where flexible conduit enters a box, panel, or equipment enclosure, helping keep moisture and contaminants out of the wiring system. This makes the NMLT9075BL a practical choice for electricians who need a reliable angled transition between liquidtight flexible conduit and rigid equipment housings.

Key Features

• Trade Size: 3/4" connector matched to 3/4" liquidtight flexible conduit for a proper, secure fit.
• Durable Non-Metallic Construction: Corrosion-resistant material stands up to moisture, chemicals, and outdoor exposure better than unprotected metal fittings.
• 90° Angle Body: The right-angle profile routes conduit around corners and into tight enclosure knockouts without requiring a separate elbow fitting, saving space and installation time.
• Liquidtight (L/T) Sealing Connection: Creates a tight seal between the flexible conduit and the enclosure to help block dust, moisture, and debris from entering the wiring compartment.
• Lightweight, Non-Conductive Body: Non-metallic material keeps the connector lightweight and non-conductive, simplifying handling on the jobsite.
• Compact, Space-Saving Profile: The one-piece angled design fits into crowded panels, junction boxes, and equipment housings where clearance is limited.
• Field-Installable Design: Built for straightforward attachment to liquidtight flexible conduit and threading into standard enclosure knockouts.
• Versatile Mounting: Designed to thread into standard enclosure and box knockouts, integrating easily with new or existing liquidtight conduit systems.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Liquidtight Flexible Conduit (LFNC) Runs
• Wet, Damp, and Corrosive Location Wiring
• Outdoor and Industrial Equipment Hookups
• Panel, Box, and Enclosure Entry Points
• HVAC and Motor Connections Requiring Flexible Conduit
• Renovation and New Construction Electrical Work

Why Arlington Industries?

Arlington Industries designs its non-metallic liquidtight connectors, including the NMLT9075BL, to give electricians a corrosion-resistant alternative to metallic fittings in wet or chemically exposed locations. The 90° body addresses a common jobsite challenge — routing 3/4" liquidtight flexible conduit into a tight enclosure or around an obstruction — without stacking a separate elbow onto a straight connector. Combined with its liquidtight sealing design, the NMLT9075BL reflects Arlington's approach of building practical, install-friendly fittings that support a clean, secure conduit-to-enclosure connection. For contractors specifying liquidtight flexible conduit in demanding settings, the NMLT9075BL offers a straightforward, corrosion-resistant solution for routing conduit at an angle without compromising the integrity of the connection.