Arlington Industries NMPV75 No...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.50
Arlington Industries NMPV75 Non-Metallic 3/4" Cord Grip Connector

Arlington Industries NMPV75 Non-Metallic 3/4" Cord Grip Connector

(No reviews yet) Write a Review

Model: NMPV75

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Arlington Industries NMPV75 Non-Metallic 3/4" Cord Grip Connector

The Arlington Industries Non-Metallic 3/4" Cord Grip Connector provides a secure, non-metallic strain-relief connection for cords and cables entering enclosures, junction boxes, and equipment housings. Sized for a 3/4" trade opening, this cord grip accommodates cable diameters ranging from 0.225" to 0.255", delivering a snug, dependable seal at the cable entry point. Built from durable non-metallic material, this connector resists corrosion and is well suited for a wide range of commercial and industrial electrical installations. Its non-metallic, non-conductive construction makes it a practical choice wherever a lightweight, corrosion-resistant strain-relief connector is required.

Key Features

  • Trade Size: 3/4" trade size fits standard 3/4" knockouts and enclosure openings for straightforward installation.
  • Cable Range: Accommodates cable diameters from 0.225" to 0.255", ensuring a properly sized, secure strain-relief grip.
  • Durable Non-Metallic Construction: Non-metallic material resists corrosion and will not conduct electricity, making this cord grip well suited for a variety of installation environments.
  • Strain Relief Design: Secures cords and cables at the point of enclosure entry, helping reduce pull-out force and abrasion at the connection point.
  • Lightweight, Non-Conductive Build: Simplifies handling and installation compared to metallic cord grip alternatives.
  • Precise Cable Fit: The 0.225"-0.255" cable range helps maintain a tight, consistent grip that supports long-term connection reliability.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Cord and Cable Entry into Electrical Enclosures
  • Equipment and Panel Wiring Connections
  • Commercial and Industrial Electrical Installations
  • Strain-Relief for Portable and Fixed Cord Connections
  • New Construction and Retrofit Wiring Projects

Why Arlington Industries?

Arlington Industries engineers this non-metallic cord grip with durable, corrosion-resistant material and a cable range designed for a dependable, properly sized fit at 3/4" openings. The non-conductive, non-metallic construction supports safe, reliable cord and cable strain relief across a range of installation environments. Electrical professionals rely on Arlington Industries components for consistent quality and dependable performance on the job site.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
ARL-20260918
Product Type:
Straight Cord Connector
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Cord Grips
Product Size:
3/4"
Product Height:
1.595 in
Country Of Origin:
United States
Product Width:
1.752 in
Product Color:
Black

Arlington Industries NMPV75 – Frequently Asked Questions

1) What cable diameter does the Arlington NMPV75 cord grip accept?
The NMPV75 grips cable from 0.225 in to 0.255 in outside diameter. That is a tight window, so measure the jacket OD with calipers before ordering. If your cord measures outside that range, the grip will either not clamp down for strain relief or will not close over the jacket at all, and you need a different cable-range cord grip.
2) Will the NMPV75 fit a 3/4 inch knockout in a junction box?
Yes. It is a 3/4 in trade size fitting, so it lands in a standard 3/4 in knockout or enclosure opening without a reducing washer or adapter.
3) Should I use a non-metallic cord grip or a metallic one for cord entry into an enclosure?
Non-metallic, like the Arlington NMPV75, is the choice where corrosion or conductivity is the concern: the body will not rust and will not carry current, and it is lighter to handle. Go metallic when the installation needs a mechanically tougher body or you are relying on the fitting for metallic raceway continuity, since a non-conductive grip gives you no bonding path.
4) Does the NMPV75 actually hold the cord, or do I still need a separate clamp?
It is a strain-relief fitting, so it clamps the cord at the point it enters the box and takes the pull and abrasion there. No separate cord clamp is needed as long as the jacket falls in the 0.225 in to 0.255 in range it is built to grip.
5) Can I use one Arlington NMPV75 for several different cord sizes across a facility?
No. The NMPV75 is a single narrow cable range, 0.225 in to 0.255 in, at a 3/4 in trade opening. If you are standardizing across a building with mixed cord jackets, you will need the matching sizes from the same non-metallic cord grip family rather than this one part number for everything.
6) What is the exact part number for the Arlington 3/4 inch non-metallic cord grip?
Arlington Industries NMPV75. The NMP prefix is the non-metallic cord grip line and the 75 denotes the 3/4 in trade size.
7) Is the NMPV75 suitable for retrofit work on existing panels?
Yes. Because it drops into an existing 3/4 in knockout, the NMPV75 works for retrofit cord entries on panels and equipment housings as well as new construction, with no enclosure modification needed.
How fast can I get the Arlington Industries NMPV75 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Arlington Industries NMPV75 come with a warranty?
Absolutely. The Arlington Industries NMPV75 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Arlington Industries NMPV75?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Arlington Industries NMPV75 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!