-
Arlington Industries Zinc die-cast, 1/2" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Secures into knockout with a zinc die-cast. Provided with insulated throat. Concrete tight when taped. Supports .405
Model: ARL-SG38A
Zinc die-cast, 1/2" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Secures into knockout with a zinc die-cast. Provided with insulated throat. Concrete...Arlington Industries
$51.96$1.96 -
-
-
Arlington Industries Non Metallic 90 degree connector for use with non metallic liquid tight conduit type B only. 1-1/2" Trade Size.
Model: ARL-NMLT90150
Non Metallic 90 degree connector for use with non metallic liquid tight conduit type B only. 1-1/2" Trade Size.Arlington Industries
$71.48$21.48 -
Arlington Industries Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 2-1/2" Rigid, 2-1/2" EMT, 2-1/2" Liquid Tight, 2-1/2" Flex.
Model: ARL-NM2060
Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 2-1/2" Rigid, 2-1/2" EMT, 2-1/2" Liquid Tight, 2-1/2" Flex.NM2060 - spec sheetArlington Industries
$68.30$18.30 -
Arlington Industries Non-metallic, liquid-tight, gray, and oil-tight colorgrip strain relief cord connector furnished with a sealing ring and locknut. Supports .750 to .875 cord range with a 1 inch trade size.
Model: ARL-NMCG100875
Non-metallic, liquid-tight, gray, and oil-tight colorgrip strain relief cord connector furnished with a sealing ring and locknut. Supports .750 to .875 cord range with a 1 inch trade size.Arlington Industries
$58.34$8.34 -
Arlington Industries Nail on, Two gang, Low Voltage mounting bracket for new construction on wood studs. Built in loop to tie off cable.
Model: ARL-LVN2
Nail on, Two gang, Low Voltage mounting bracket for new construction on wood studs. Built in loop to tie off cable.LVN2 - spec sheetArlington Industries
$53.73$3.73 -
Arlington Industries Straight, zinc die-cast connector for use with metallic or non metallic liquid tight conduit type B only. 1-1/4" Trade Size. 90 degrees.
Model: ARL-LT90125
Straight, zinc die-cast connector for use with metallic or non metallic liquid tight conduit type B only. 1-1/4" Trade Size. 90 degrees.Arlington Industries
$74.77$24.77 -
Arlington Industries Box Extender, levels and supports the wiring device where the box is set back from the wall surface extends the box up to an 1-1/2. 2 hour fire rating. three gang.
Model: ARL-BE3
Box Extender, levels and supports the wiring device where the box is set back from the wall surface extends the box up to an 1-1/2. 2 hour fire rating. three gang.BE3 - spec sheetArlington Industries
$60.39$10.39 -
Arlington Industries Zinc die-cast, Single screw, 1-1/2" knockout squeeze connector with round end stop. For Flex, AC, MCI cable. Concrete tight when taped. End stop diameter: 1.460
Model: ARL-L425
Zinc die-cast, Single screw, 1-1/2" knockout squeeze connector with round end stop. For Flex, AC, MCI cable. Concrete tight when taped. End stop diameter: 1.460Arlington Industries
$59.95$9.95 -
Arlington Industries Gard-N-Post. 19.5" support for outdoor light fixtures or GFCI devices outdoors. Opennings on both sides of post for back to back power or power on one side and low on the other. Built in stablaizers need to assembly. Opennings i
Model: ARL-GP19BR
Gard-N-Post. 19.5" support for outdoor light fixtures or GFCI devices outdoors. Opennings on both sides of post for back to back power or power on one side and low voltage on the other. Built in...Arlington Industries
$124.51$74.51 -
-
Arlington Industries For steel and aluminum cable, Zinc die-cast MC feeder cable connector with a steel strap. Including an end stop that comes with additional end stop bushings for a wider range of cables. Secures into a 1" knockout with a steel loc
Model: ARL-8412
For steel and aluminum cable, Zinc die-cast MC feeder cable connector with a steel strap. Including an end stop that comes with additional end stop bushings for a wider range of cables. Secures into...Arlington Industries
$67.31$17.31 -
Arlington Industries Steel one box designed for new construction or retrofit. Side mounts to joist. 70lb fan rated, 50lb fixture rated. 2-3/8 box depth. 23.0 cu.
Model: ARL-FBS1423
Steel one box designed for new construction or retrofit. Side mounts to joist. 70lb fan rated, 50lb fixture rated. 2-3/8 box depth. 23.0 cu.FBS1423 - spec sheetArlington Industries
$78.01$28.01 -
Arlington Industries Zinc die-cast, single screw duplex connector snaps into 1/2" knockout with an external spring steel clip. Concrete tight when taped.
Model: ARL-846ST
Zinc die-cast, single screw duplex connector snaps into 1/2" knockout with an external spring steel clip. Concrete tight when taped.Arlington Industries
$53.12$3.12 -
-
Arlington Industries Metallic adjustable floor box. Brass with flip lids. Includes tamper resistant duplex receptacle, cover plate with gasket and Arlington NM94 connector and Arlington NM900 knockout plug.
Model: ARL-FLBAF101MB
Metallic adjustable floor box. Brass with flip lids. Includes tamper resistant duplex receptacle, cover plate with gasket and Arlington NM94 connector and Arlington NM900 knockout plug.FLBAF101MB -...Arlington Industries
$198.61$148.61 -
-
-
Arlington Industries Nail on Fan and Fixture box with steel bracket. For up to 1-1/2" ceiling thicknessess including drywall on furring strips or hat channel. 20 cu.
Model: ARL-FB417S
Nail on Fan and Fixture box with steel bracket. For up to 1-1/2" ceiling thicknessess including drywall on furring strips or hat channel. 20 cu.FB417S - spec sheetArlington Industries
$64.72$14.72
Menu