Manufacturer Resources
Spec Sheet
Product Specs
- Wire Size:
- 0.470 to 0.660 Inch
- Connection:
- Straight
- Connection Type Screw Connection To Housing:
- Other
- Construction Type:
- External thread
- Etim:
- EC001180 Screw connection for protective metallic hose
- Inner Quantity:
- 50
- Insulation:
- Nylon
- Material Housing:
- Other
- Nominal Size In Inch:
- 1/2 inch
- Outer Quantity:
- 500
- Product Group:
- Conduit & Raceway
- Revolving Thread:
- N
- Standards:
- CSA, UL
- Total Length:
- 11.11mm
- Unspsc:
- 39121419 Flex connectors
- Weight Uom:
- 5.69 lbs. per 100
- Department:
- Electrical
- Product Subgroup:
- Flexible Conduit & Fittings
- Product Type:
- AC/MC/Flex Connector
- Product Model:
- Straight
- Product Finish:
- Zinc Plated
- Product Details:
- Armoured Cable and Flexible Metal Conduit Fittings
- Product Color:
- Metallic
- Product Material:
- Steel
Thomas & Betts 3110-C – Frequently Asked Questions
1) What cable size does the Thomas & Betts 3110-C connector accept?
The 3110-C is a 1/2 inch trade size connector with a cable range of 0.470 to 0.660 inch. Measure the outside diameter of the armor or flex jacket, not the conductors inside. If your cable OD falls below 0.470 or above 0.660 inch, the clamp will not grip properly and you need a different range connector.
2) Is the Thomas & Betts 3110-C UL listed and CSA approved?
Both. The 3110-C carries UL and CSA, which covers it for work on either side of the border and satisfies the listed-fitting requirement on most commercial and institutional jobs.
3) Can I use the 3110-C on both MC armored cable and flexible metal conduit?
Yes. The 3110-C is an armored cable and flexible metal conduit fitting, so it terminates either, provided the outside diameter falls in the 0.470 to 0.660 inch range at 1/2 inch trade size.
4) Does the 3110-C have an insulated throat?
Yes, the throat is nylon insulated, so conductors pass over a smooth bushing rather than bare steel. That is what inspectors look for when the armor termination sits at a box knockout with conductors pulled through it.
5) What is the 3110-C made of and will it hold up in a damp mechanical room?
Steel body with a zinc plated finish, metallic in appearance. Zinc plated steel is intended for dry indoor and general interior work; it is not a wet-location or corrosive-environment fitting, so for exterior or washdown areas choose a fitting rated for that use.
6) How does the 3110-C attach to the box?
It uses an external thread on the fitting body that passes through the knockout and is secured with a locknut on the inside of the enclosure. The thread does not revolve, so the body stays fixed as you tighten.
7) How are the 3110-C connectors packaged for a bulk order?
They come 50 to an inner box and 500 per outer carton, which is the usual way an electrical contractor buys them for a rough-in. Shipping weight works out to 5.69 lbs per 100 pieces.
How fast can I get the Thomas & Betts 3110-C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 3110-C come with a warranty?
Absolutely. The Thomas & Betts 3110-C is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 3110-C?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 3110-C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.