You may also like
Eaton B-Line series meter breakers
Manufacturer Resources
Product Specs
- Amperage Rating:
- 100A
- Bypass:
- Test block
- Certifications:
- UL
- Compliances:
- EUSERC Approved
- Cover Door Type:
- Ring
- Degree Of Protection:
- 3R
- Interrupt Rating:
- 22 kAIC
- Line Lug Size:
- #14-2/0
- Load Lug Size:
- MCB
- Mounting Method:
- Surface mount
- Number Of Jaws:
- 5
- Number Of Positions:
- 1
- Number Of Wires:
- 1Ø/3W
- Product Height:
- 38 IN
- Product Length Depth:
- 4.63 IN
- Product Weight:
- 37 LB
- Product Width:
- 12 IN
- Special Features:
- 22K AIC rated breaker
- Department:
- Electrical
- Product Finish:
- ANSI 61 gray paint
- Product Material:
- Galvanized steel
B-LINE 215 MTBH MS45 – Frequently Asked Questions
1) Is the B-Line 215 MTBH MS45 meter breaker single phase or three phase?
It's a single phase, 3-wire (1PH/3W) meter socket breaker combination with a 5-jaw socket. The fifth jaw is what you need for the utility's neutral or the 120/240V single phase metering configuration many utilities specify. If your service is three phase, this is the wrong unit.
2) Will the 215 MTBH MS45 meter breaker fit a 100 amp service?
Yes, it's rated 100 A with a main circuit breaker carrying a 22 kAIC interrupting rating, so it suits a 100 amp residential or light commercial service where the utility requires that fault current level.
3) Can this Eaton B-Line meter breaker be installed outdoors?
Yes. The enclosure is 3R rated galvanized steel finished in ANSI 61 gray paint, which is the standard rainproof outdoor rating for a service entrance location on an exterior wall. It surface mounts, so it goes on the wall face rather than flush into it.
4) Does this meter breaker meet utility requirements on the West Coast?
It's EUSERC Approved and UL listed. EUSERC approval is what most western US utilities require before they'll set a meter on an enclosure, so it's the right family for those service territories. Always confirm the specific drawing number your utility wants on the job.
5) How much wall space do I need for the B-Line 215 MTBH MS45, and how heavy is it?
Figure 38 inches high, 12 inches wide and 4.63 inches deep, at 37 pounds. That weight is a two-person lift on a ladder or a one-person job with the unit pre-hung on lag anchors before the conductors go in.
6) Does the 215 MTBH MS45 have a lever bypass or a test block?
It uses a test block for bypass rather than a lever bypass. Utilities differ on which they accept for changing a meter under load, so match the bypass type to what your utility's standard calls out. The meter opening is a ring type cover door.
7) Can I feed more than one meter from the 215 MTBH MS45?
No. It's a single position unit, one meter socket with one main breaker. For a duplex or multi-tenant service you need a multi-position meter pack instead.
How fast can I get the B-LINE 215 MTBH MS45 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 215 MTBH MS45 come with a warranty?
Absolutely. The B-LINE 215 MTBH MS45 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 215 MTBH MS45?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 215 MTBH MS45 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.