B-Line 81514F 10 GL Eaton series Grip Strut eight diamond plank, 120" Grating length, 18.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge

Yes. The 81514F 10 GL plank is listed as OSHA Compliant, and the diamond-perforated surface is the non-slip walking surface itself, intended for safe, sturdy footing where non-slip is required. That is the usual reason it gets specified on elevated platforms, catwalks, mezzanine walkways, and equipment access runs.

Mill-galvanized is the finish on this plank, meaning the steel is galvanized before forming, so the cut and pierced edges are raw steel rather than coated. It handles normal indoor industrial and sheltered exterior duty. For constant wetting, wash-down, coastal salt, or chemical exposure, you want a hot-dip galvanized after fabrication or stainless plank instead, not mill-galvanized.

Each 120 inch plank is listed at 6.1 lb, so it is a genuine one-man carry up a ladder and adds almost nothing to a roof or mezzanine dead load. A 14 gauge steel section at that weight is why Grip Strut gets used for service platforms where bar grating would be too heavy to handle.

The eight-diamond count is the number of diamond rows across the width of the plank, which on the 81514F 10 GL gives 18.75 inches of walking surface per piece. One plank suits a single-file service catwalk. For a wider platform or two-way traffic you lay multiple planks side by side on your supports rather than looking for a wider single piece.

The 81514F 10 GL is supplied as the plank only, 120 inches of 14 gauge steel with 1.5 inch turned-down channel sides. Hold-down clips, saddle clips, self-drilling screws, or weld attachment to your supporting steel are separate items you order to suit the support framing.

Yes, the plank is 14 gauge steel and cuts with a metal chop saw or band saw to fit between supports. Because the finish is mill-galvanized, the fresh cut ends are bare steel, so touch them up with a cold galvanizing compound if the walkway sees any moisture.

Order it as Eaton B-Line 81514F 10 GL. That single number covers the eight-diamond plank in 120 inch length, 18.75 inch width, 14 gauge steel, mill-galvanized, with the 1.5 inch channel. There are no separate finish or length options hiding behind it, so matching that number matches what is already installed.