You may also like
B368SS6
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 4.37 in
- Product Length Depth:
- 5 in
- Product Weight:
- .95 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Four hole closed angle, 45 deg
- Product Finish:
- Stainless steel type 316
- Product Details:
- Four hole closed angle, 45 deg
- Product Material:
- Steel
B-LINE B368SS6 – Frequently Asked Questions
1) What is the B-Line B368SS6 strut fitting used for?
The B368SS6 is a four hole closed angle fitting bent at 45 degrees. It joins two runs of strut channel at a fixed 45 degree angle, with two bolt holes on each leg so each side ties into the channel at two points rather than pivoting on a single fastener. Use it where a brace or a diagonal run has to come off a main strut line at 45 degrees and stay there.
2) Is the B-Line B368SS6 angle fitting suitable for outdoor, coastal or wash-down areas?
Yes. The B368SS6 is finished in Type 316 stainless steel, which is the grade specified for marine and coastal exposure, chemical plants, food processing wash-down and similar corrosive duty. That is a step above the 304 stainless or hot dip galvanized fittings normally used for general outdoor work.
3) Does the B-Line B368SS6 come with bolts and channel nuts?
The B368SS6 is the angle fitting only. Four bolt holes are provided, so you need four hardware sets, bolt plus spring nut, to land it. For a 316 stainless fitting in a corrosive location, match the hardware to the fitting and use 316 stainless bolts and nuts as well; mixing in plain or zinc hardware creates the corrosion point the stainless fitting was bought to avoid.
4) What is the difference between a four hole closed angle and an open angle strut fitting?
A closed angle, like the B368SS6, wraps the corner so both legs sit against the inside faces of the two channels and the bend is fixed at 45 degrees. An open angle sits on the outside of the corner instead. The four hole pattern, two per leg, is the one to use when the joint has to resist twisting; a two hole angle with one bolt per leg will rotate under load.
5) Is the B-Line B368SS6 solid stainless or just stainless coated?
The material is listed as steel with a Type 316 stainless steel finish. Order it where the 316 surface is what the specification calls for on exposure grounds.
How fast can I get the B-LINE B368SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B368SS6 come with a warranty?
Absolutely. The B-LINE B368SS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B368SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B368SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.