You may also like
B412GRN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1.87 in
- Product Length Depth:
- 5.43 in
- Product Weight:
- .89 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Three hole offset u- support
- Product Finish:
- DURA GREEN
- Product Details:
- Three hole offset u- support
- Product Material:
- Steel
- Product Length:
- 5.43 in
B-LINE B412GRN – Frequently Asked Questions
1) What is the B-Line B412GRN used for?
The B412GRN is a three hole offset U-support, a formed steel bracket used to stand off and support conduit, pipe, or strut runs where the load has to sit away from the mounting surface. Three fastening holes give you the offset leg plus the mounting face.
2) How much space does the B412GRN B-Line support take up on a wall or strut run?
Plan the layout around 5.43 x 1.87 x 1.62 inches. That footprint matters when you are spacing supports along a strut channel or fitting several brackets on one mounting plate.
3) Is the green coating on the B-Line B412GRN suitable for corrosive or wash-down areas?
The finish is B-Line's Dura-Green coating over steel. It is a coated carbon steel part, so it is intended for general indoor and protected industrial use rather than as a stainless substitute in constant wet or chemical exposure. For severe corrosion service, spec a stainless or hot-dip galvanized support instead.
4) Do I need to order fasteners separately for the B-Line B412GRN?
Yes. The B412GRN is the bracket only. Bolts, nuts, and any strut channel nuts or anchors for your mounting surface are ordered separately and sized to the surface you are fastening into.
5) What is the exact part number to order this B-Line green offset support under?
Order it as B-Line B412GRN. The GRN suffix denotes the Dura-Green finish, so dropping it gets you a different finish of the same bracket.
6) Does the B-Line B412GRN carry a UL listing or other certification?
The B412GRN is a plain structural support bracket. It is a mechanical steel fitting, not an electrical device, so there is no listing tied to the part itself; the raceway and fittings it carries are what get listed in your system.
7) How heavy is the B412GRN offset support for shipping and overhead install?
Just under a pound each at .89 lb, so a box of them is easy to carry up a lift and the dead load added to an overhead run is minimal.
How fast can I get the B-LINE B412GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B412GRN come with a warranty?
Absolutely. The B-LINE B412GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B412GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B412GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.