You may also like
B425HDG
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 5.43 in
- Product Weight:
- 1.67 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Six hole u-support
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Six hole u-support
- Product Material:
- Steel
- Product Length:
- 5.43 in
B-LINE B425HDG – Frequently Asked Questions
1) Is the B-Line B425HDG u-support rated for outdoor or wet locations?
The B425HDG is hot-dipped galvanized steel, which is the finish specified for outdoor, damp, and corrosive service such as rooftops, parking structures, and wastewater plants. Plain or electro-galvanized supports are the indoor-dry equivalent. If your run leaves conditioned space, the HDG version is the one to order.
2) What size is the B-Line B425HDG six hole u-support?
Overall it measures 5.43 in by 3.5 in by 1.62 in. Those figures are what you need to confirm clearance between the support and adjacent conduit runs or a wall face before you lay out the hole pattern.
3) What is a six hole u-support used for in an electrical install?
A u-support is a formed steel bracket used to pick up and support conduit, cable, or strut off a structural surface. The B425HDG has six holes, so you have multiple fastening and attachment points rather than a single fixed pattern, which gives you some latitude on where the anchors land relative to the run.
4) Does the B-Line B425HDG come with mounting hardware?
No fasteners are included. The B425HDG is the support bracket only, so specify your own anchors, bolts, or strut nuts to suit the base material. Match the fastener plating to the bracket: use hot-dip galvanized or stainless hardware outdoors so you do not set up a corrosion cell against the galvanized steel.
5) What is the manufacturer part number for the B-Line six hole u-support I should quote?
Order it as B-Line B425HDG. The HDG suffix is the hot-dipped galvanized finish, so if a drawing calls out a plain-finish B425 you are looking at a different finish of the same bracket.
6) How much does the B-Line B425HDG weigh?
1.67 lb each. That matters when you are totalling dead load on an existing structure or a suspended assembly, or estimating a pallet quantity for a large conduit job.
How fast can I get the B-LINE B425HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B425HDG come with a warranty?
Absolutely. The B-LINE B425HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B425HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B425HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.