You may also like
B432GRN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 5.37 in
- Product Weight:
- 1 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Four hole tee gusset plate
- Product Finish:
- DURA GREEN
- Product Details:
- Four hole tee gusset plate
- Product Material:
- Steel
B-LINE B432GRN – Frequently Asked Questions
1) What is the B-Line B432GRN used for in a strut channel run?
The B432GRN is a four hole tee gusset plate in steel. It bolts across the joint where one length of channel meets another at a right angle, so the tee connection carries load instead of relying on the channel ends alone. Four bolt holes, two per leg, spread the load across both members. Bolts, nuts and channel spring nuts are separate items and need to be ordered with it.
2) Does the B-Line B432GRN come with the bolts and channel nuts?
No. The B432GRN ships as the plate only, one four hole steel tee gusset plate per part number. You supply the hardware: four bolts with matching channel spring nuts sized to your strut. To keep the corrosion protection consistent, spec fasteners with a finish suited to the same environment as the DURA GREEN coating.
3) What size is the B-Line B432GRN tee gusset plate?
Dimensions are 5.37 in length/depth, 3.5 in height, and 1.62 in width, at about 1 lb. Take the 1.62 in dimension as the plate's across-the-face width, which is what decides whether it sits inside the flanges of the channel you are joining, so check it against your strut profile before ordering.
4) What does the DURA GREEN finish on the B432GRN mean, and can I use it outdoors or in a wet area?
DURA GREEN is B-Line's green epoxy/polyester coating over the steel plate, used where plain electro-galvanized parts would corrode. It is the finish typically specified for damp, chemical and water treatment environments rather than clean dry interiors. Match it to the rest of your run: mixing a DURA GREEN fitting with plain galvanized channel and bolts leaves the uncoated parts as the weak point.
5) What part number do I order to match existing green B-Line tee gussets on site?
Order by manufacturer part number B432GRN. The GRN suffix is the DURA GREEN coated version, so if the plates already installed are the green coated four hole tee gussets, that is the direct match. A plain galvanized equivalent of the same plate would carry a different suffix and would not match the finish.
6) Is the B432GRN a UL listed or certified item?
No listing or certification applies to the B432GRN. It is a structural steel channel fitting, not an electrical device, so it carries no product certification of its own. Where an inspector wants a rating on a support system, that comes from the channel and the engineered load data for the assembly, not from the gusset plate.
How fast can I get the B-LINE B432GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B432GRN come with a warranty?
Absolutely. The B-LINE B432GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B432GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B432GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.