B-Line BCTS1-108 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 450 lbs, 36" 350 lbs load cap,Steel,Safety factor of 3, BCTS1 series, Stainless steel type 316, 1" max conduit size, 54 conduit h

The BCTS1-108 SS6 takes conduit or pipe up to 1 inch maximum, with 54 conduit/pipe positions along the piece. It is made for running multiple lines at one elevation rather than stacking them, so it suits branch conduit banks rather than large-diameter pipe.

It is type 316 stainless, which is the grade specified for coastal, chemical, wastewater and washdown environments where standard galvanized strut corrodes. If your run is indoors and dry, a plain steel or galvanized version of the BCTS1 series will do the same mechanical job.

Measures 110 inches in length, 2.62 inches wide and 1.313 inches high, and weighs 6.85 lbs. That length matters for shipping and for handling on a lift, and it means one piece covers a long horizontal run without splicing.

Yes, the BCTS1 series carries a UL Listing, which is what most inspectors and institutional specs want to see on conduit support hardware in an electrical department submittal.

Use the BCTS1 when you have multiple conduit or pipe runs travelling together at the same elevation, up to 1 inch each. One trapeze member carries the whole bank off a pair of hangers instead of hanging every line separately, and the 54 positions let you space and add lines later. For a single isolated run, one-hole or two-hole straps off the deck are simpler.

The part number is BCTS1-108 SS6 from Eaton B-Line. The SS6 suffix is the type 316 stainless version; the 108 identifies the length in the series, which comes in at 110 inches overall.