B-Line BCTS3-48 SS6 Eaton seri...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,030.01
B-Line BCTS3-48 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 800 lbs, 36" 750 lbs load cap, Steel, Safety factor of 3,BCTS3 series,Stainless steel type 316, 4" max conduit size, 8 conduit hol

B-Line BCTS3-48 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 800 lbs, 36" 750 lbs load cap, Steel, Safety factor of 3,BCTS3 series,Stainless steel type 316, 4" max conduit size, 8 conduit hol

(No reviews yet) Write a Review

Model: BCTS3-48 SS6
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,030.01
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 800 lbs, 36" 750 lbs load cap, Steel, Safety factor of 3,BCTS3 series,Stainless steel type 316, 4" max conduit size, 8 conduit holes

Manufacturer Resources

Product Specs

Application:
Support runs of conduit/pipe on same elevation
Certifications:
UL Listed
Conduit Pipe Size Max:
4 in
Load Capacity:
24" 800 lbs, 36" 750 lbs
Number Of Conduits Pipes:
8
Product Height:
1.313 in
Product Length Depth:
50 in
Product Weight:
5.71 lb
Product Width:
6.5 in
Special Features:
Safety factor of 3
Department:
Electrical
Product Type:
BCTS3 series
Product Finish:
Stainless steel type 316
Product Details:
BCTS3 series
Product Material:
Steel

B-LINE BCTS3-48 SS6 – Frequently Asked Questions

1) How many conduits can the B-Line BCTS3-48 SS6 trapeze support hold, and what is the largest pipe it takes?
The BCTS3-48 SS6 is set up for 8 conduits or pipes, with a maximum conduit size of 4 inches. It is built to carry runs of conduit or pipe at the same elevation, so everything lands on one plane rather than stacked.
2) Is the BCTS3-48 SS6 suitable for a wet, corrosive, or outdoor install?
Yes. The SS6 suffix on the BCTS3-48 means Type 316 stainless steel, which is the grade specified for chloride and chemical exposure, wash-down areas, coastal sites, and water treatment plants. If you only need ordinary indoor dry-location support, a plated or galvanized version of the same trapeze is the cheaper route.
3) What are the dimensions of the B-Line BCTS3-48 SS6 and how much does it weigh?
It measures 50 inches in length/depth, 6.5 inches wide, and 1.313 inches high, weighing 5.71 lbs. The 50 inch overall on a 48 designation gives you the extra run past the end holes, so check your available ceiling or wall width before ordering the 48.
4) Is the B-Line BCTS3 conduit support UL Listed for electrical work?
Yes, the BCTS3 series carries a UL Listed certification, which is what most inspectors and spec writers want to see on conduit support hardware in a commercial or institutional job.
5) What is the exact part number to order for the 316 stainless 48 inch version?
Order MPN BCTS3-48 SS6 from Eaton B-Line. BCTS3 is the series, 48 is the nominal length, and SS6 designates Type 316 stainless. Getting the suffix right matters, since the same BCTS3 body is sold in other materials.
6) Will this work for 4 inch rigid conduit or is it only for smaller trade sizes?
4 inches is the maximum conduit or pipe size the BCTS3 accepts, so a 4 inch run is within range. Bear in mind that eight runs of large-diameter pipe adds up fast against the 800 lb capacity at 24 inch span, so run the weight per linear foot before you set your support spacing.
How fast can I get the B-LINE BCTS3-48 SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCTS3-48 SS6 come with a warranty?
Absolutely. The B-LINE BCTS3-48 SS6 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCTS3-48 SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCTS3-48 SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!