B-Line BCTS3-96 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 800 lbs, 36" 750 lbs load cap, Steel, Safety factor of 3,BCTS3 series,Stainless steel type 316, 4" max conduit size, 16 conduit ho

The BCTS3-96 SS6 is a 16-hole channel trapeze support, so it carries up to 16 runs of conduit or pipe side by side on the same elevation. Maximum conduit size per hole is 4 inches.

Yes. The SS6 suffix is type 316 stainless steel, which is the grade specified for chloride exposure, coastal and marine sites, water treatment plants, food processing and chemical areas. For dry interior work a plain or galvanized finish would normally be used instead.

What you get is the BCTS3-96 SS6 trapeze channel itself. Threaded rod, rod-attachment fittings, and any anchors into the deck are separate items and need to be ordered alongside it. Match the rod and fittings to type 316 stainless if the reason you picked SS6 is corrosion; mixing carbon steel rod with a stainless channel gives up the corrosion resistance at the connection.

4 inches is the maximum size the support accepts, but filling all 16 positions with 4 inch runs will put you over the rating long before you fill the channel. Total supported weight is what governs: 800 lbs at a 24 inch span, 750 lbs at 36 inches. Work out the filled weight of the runs you are carrying and set your span from there.

Yes, the BCTS3 series carries a UL Listing, which is what most inspectors and institutional specs look for on electrical raceway support.

Individual clamps fix one pipe at a time to a length of strut you assemble yourself. The BCTS3 arrives as a single pre-punched channel with 16 conduit positions already set, so a bank of parallel runs at one elevation goes up as one piece rather than as strut plus sixteen clamps. It is the faster choice for repeated multi-run racks; single or scattered runs are still better served by individual clamps on strut.