You may also like
Eaton auxiliary support kit, Steel, 1/2"-13 HHCS and hardware, Telco gray powder coat, Angle wall support kit
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1.65 in
- Product Length Depth:
- 2.19 in
- Product Weight:
- 2.25 lb
- Product Width:
- 6 in
- Department:
- Electrical
- Product Model:
- Angle wall support kit
- Product Finish:
- Telco gray powder coat
- Product Material:
- Steel
B-LINE SB210KTG – Frequently Asked Questions
1) What comes in the B-Line SB210KTG angle wall support kit?
The SB210KTG is a wall angle support kit that ships as an assembly with the mounting hardware included: 1/2"-13 hex head cap screws and associated hardware, all steel. You supply the wall anchors suited to your substrate, since concrete, block, and stud walls each need a different anchor.
2) What size bolt does the B-Line SB210KTG cable runway wall support use?
It uses 1/2"-13 hex head cap screws, the coarse thread standard in half-inch cable runway and rack hardware. If you are matching existing B-Line runway splices or channel on the same run, that is the same bolt size, so your wrench and spare hardware carry over.
3) What finish is the B-Line SB210KTG, and will it match my existing runway?
Telco gray powder coat, which is the standard finish on B-Line telecom cable runway and ladder rack. If your existing runway, ladder, and junction hardware are telco gray, this kit matches. It will not match black or zinc-plated runway systems.
4) How much wall space does the B-Line angle support kit take up?
The kit measures 6 in wide, 2.19 in deep, and 1.65 in high, so it is a compact bracket that sits close to the wall rather than a long cantilever arm. Plan your wall penetrations around that 6 inch footprint, and check that the bracket depth clears any conduit, raceway, or trim running along the wall line.
5) Do I need an auxiliary support kit or a full wall angle bracket for my cable runway?
An auxiliary support kit like the SB210KTG is added support at a wall, used where a runway run terminates or needs an extra bearing point between threaded rod drops. It is not a substitute for the primary suspension of a long overhead run. If you are supporting a long span with no wall to bear on, you want ceiling threaded rod kits or a full wall angle bracket assembly instead.
6) Is the B-Line SB210KTG steel or aluminum?
Steel, finished in telco gray powder coat. That matters for two reasons: steel gives you the load capacity expected of a wall angle support in a data or telecom room, and the powder coat is the only corrosion protection, so it is intended for dry indoor equipment rooms rather than exterior or wash-down environments.
7) How heavy is the B-Line SB210KTG kit, and does one person install it?
The kit weighs 2.25 lb complete with hardware, so it is a one-hand piece on the ladder. The work is in laying out and drilling the wall, not in holding the bracket.
How fast can I get the B-LINE SB210KTG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB210KTG come with a warranty?
Absolutely. The B-LINE SB210KTG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB210KTG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB210KTG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.