You may also like
Eaton auxiliary support kit, Steel, Yellow zinc finish, Used with 3/8-2" bar, J' Clip kit
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 4.5 in
- Product Length Depth:
- 1.5 in
- Product Weight:
- .5 lb
- Product Width:
- 1.25 in
- Department:
- Electrical
- Product Model:
- J" clip kit
- Product Finish:
- Yellow zinc chromate
- Product Material:
- Steel
B-LINE SB2003BYZ – Frequently Asked Questions
1) What size bar or rod does the B-Line SB2003BYZ J clip kit clamp onto?
The B-Line SB2003BYZ J clip kit is made to grip bar stock from 3/8 inch up to 2 inches. If the member you are supporting from falls outside that range, this clip won't seat on it correctly and you need a different attachment.
2) Do I need to weld or drill the steel to use the B-Line SB2003BYZ support clip?
No. The J clip is a clamp-on auxiliary support that grips bar stock in the 3/8 to 2 inch range, so you attach it without welding or field drilling the structural member. That keeps it usable where the spec or the building owner prohibits cutting or hot work on existing steel.
3) Is the B-Line J clip auxiliary support kit OK for damp or unconditioned indoor areas?
It's steel with a yellow zinc chromate finish. That plating gives ordinary indoor corrosion protection, which is what you want in a mechanical room, ceiling plenum or unconditioned space. For exterior, wet, or corrosive service you'd want a hot dip galvanized or stainless support instead, because zinc chromate isn't an outdoor coating.
4) How much space does the B-Line SB2003BYZ clip take up once it's installed?
Plan on 4.5 inches of height, 1.25 inches of width and 1.5 inches of depth per clip. That height is the number that matters most in a tight ceiling cavity or above a crowded rack, so check your clearance from the bar to the deck before you order a quantity.
5) Is the B-Line J clip kit sold as a complete kit or do I buy the pieces separately?
It ships as a kit under model designation J clip kit, part number SB2003BYZ, at about a half pound per kit. Order one per attachment point, and add your own threaded rod, strut or hanger to run down from it since the kit covers the clip attachment only.
6) Does the B-Line SB2003BYZ J clip kit carry a UL listing or other certification?
Certifications are shown as not applicable for this clip kit. Treat it as a plain mechanical support component, and if your job requires a listed seismic or fire rated attachment, specify a product that carries that listing.
How fast can I get the B-LINE SB2003BYZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB2003BYZ come with a warranty?
Absolutely. The B-LINE SB2003BYZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB2003BYZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB2003BYZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.