B-Line Eaton series all thread...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$539.41
B-Line Eaton series all threaded rod and drop wire supports, 160 lb load capacity, 5/32" to 1/4" flange thickness, Verticle flange hangers

B-Line Eaton series all threaded rod and drop wire supports, 160 lb load capacity, 5/32" to 1/4" flange thickness, Verticle flange hangers

(No reviews yet) Write a Review

Model: BH1-F2
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$539.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series all threaded rod and drop wire supports, 160 lb load capacity, 5/32" to 1/4" flange thickness, Verticle flange hangers

Manufacturer Resources

Product Specs

Certifications:
cULus Listed
Load Capacity:
160 lbs
Product Height:
2.75 in
Product Length Depth:
1 in
Product Weight:
.042 lb
Product Width:
.15 in
Department:
Electrical
Product Group:
Mounting Hardware
Product Subgroup:
Hangers
Product Type:
Verticle flange hangers
Product Size:
5/32 inch to 1/4 inch flange thickness
Product Details:
Verticle flange hangers
Product Length:
1 in

B-LINE BH1-F2 – Frequently Asked Questions

1) Will the B-Line BH1-F2 hanger clip fit the beam flange I'm working with?
The BH1-F2 vertical flange hanger is sized for flange thicknesses from 5/32 inch up to 1/4 inch. That covers typical bar joist and light structural steel flanges. Anything thicker than 1/4 inch, and the clip won't seat properly, so measure the flange before you order a box of them.
2) How much weight can a B-Line BH1-F2 flange hanger hold?
Rated at 160 lbs per hanger. That is the published load capacity for the BH1-F2, and it is what you size your spacing against when you're hanging a run of conduit, cable tray drops, or threaded rod off steel.
3) Is the B-Line BH1-F2 hanger UL listed for electrical support work?
It carries a cULus Listing, which covers it for both US and Canadian installations. For an inspector asking whether your conduit and drop wire supports are listed, that is the mark on this hanger.
4) Can I use the BH1-F2 for both threaded rod and drop wire?
Yes. The BH1-F2 is part of the Eaton B-Line all threaded rod and drop wire support family, so one clip covers both methods of hanging. That is useful on a job where some runs go up on rod and lighting whips or low-voltage drops go up on wire, because you standardize on a single clip instead of stocking two.
5) Is the B-Line BH1-F2 a bolt-on or a clip-on hanger?
It's a flange hanger, meaning it grips the edge of a vertical steel flange directly, no drilling, welding, or through-bolting. An electrician can install it by hand as they walk the run, which is the whole reason these get spec'd over drilled anchors on exposed steel.
6) What part number do I order for the B-Line 160 lb vertical flange hanger?
Order it as BH1-F2, the Eaton B-Line manufacturer part number. That single model covers the full 5/32 inch to 1/4 inch flange range, so there is no separate size to specify within that band.
7) What are the physical dimensions of the B-Line BH1-F2 clip?
The clip is a small stamped piece: 2.75 in height, 1 in length/depth, and .15 in width, weighing .042 lb. Worth knowing when you're figuring clearance in a tight plenum or above a hard ceiling where the hanger has to tuck in against the flange without fouling ductwork.
How fast can I get the B-LINE BH1-F2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BH1-F2 come with a warranty?
Absolutely. The B-LINE BH1-F2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BH1-F2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BH1-F2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!