Eaton B-Line series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Angle bracket fasteners, 0.25"-20 rod size, 160 lbs load capacity
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Load Capacity:
- 16 lbs
- Product Category:
- Hangers
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .062 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Angle bracket fasteners
- Product Details:
- Angle bracket fasteners
B-LINE BH4-H7 – Frequently Asked Questions
1) What size threaded rod does the B-Line BH4-H7 angle bracket fastener take?
The BH4-H7 is built around 1/4-20 threaded rod, so it mates with standard 1/4 inch all-thread and the 1/4-20 rod couplings and nuts already on a typical electrical or mechanical hanger job. It will not accept 3/8-16 rod, which is the other common size on commercial supports, so check what is hanging above before you order.
2) Is the B-Line BH4-H7 rod hanger UL listed for electrical work?
UL and cUL listed, which is what an inspector on a commercial or institutional job wants to see on a support carrying conduit, cable tray hardware, or a lighting drop. The cUL side covers Canadian installations on the same part number.
3) How much room does the B-Line BH4-H7 bracket take up in a tight ceiling cavity?
Small footprint, 1 x 1 x 1 inches, so it fits where a plenum or a hard-lid cavity leaves you almost nothing to work with. At .062 lb apiece it adds essentially nothing to what the rod is already carrying, which matters when you are running a long line of drops off the same structure.
4) Can the B-Line BH4-H7 be used on drop wire as well as all-thread?
It belongs to Eaton B-Line's all threaded rod and drop wire support line, so it is intended for both methods of hanging, with the threaded connection sized for 1/4-20 rod. Contractors mixing rod drops and wire drops across the same ceiling can standardize on the one fastener rather than stocking two.
5) What kind of fastener is the B-Line BH4-H7, exactly?
It is an angle bracket fastener, meaning the piece that ties a hanger rod to a structural member at a right angle, not the rod, the clamp, or the strut itself. Buyers replacing a failed drop usually need this plus the rod and the nuts; the BH4-H7 is the bracket only.
6) Is there more than one version of the B-Line BH4-H7 hanger bracket to specify?
One part number covers it, BH4-H7, with no finish or size options to pick through. For an MRO or facilities buyer standardizing hanger hardware across a building, that means a single line item to reorder rather than a configuration to get wrong.
How fast can I get the B-LINE BH4-H7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BH4-H7 come with a warranty?
Absolutely. The B-LINE BH4-H7 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BH4-H7?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BH4-H7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.