You may also like
B-Line Eaton series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain
Model: BLN-B3050-2X9PLN
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain
B-LINE
$154.94
$140.80
B-Line Eaton series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel
Model: BLN-B3050-2X8PLN
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel
B-LINE
$147.46
$131.16
B-Line Eaton series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel finish
Model: BLN-B3050-2X6PLN
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel finish
B-LINE
$136.81
$117.66
B-Line Eaton series beam clamps, Suspendes hanger rod from the center of an I-beam., 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width,
Model: BLN-B3050-2X10PLN
Eaton B-Line series beam clamps, Suspendes hanger rod from the center of an I-beam., 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain Steel
B-LINE
$159.59
$148.53
B-Line Eaton series beam clamps, Suspendes hanger rod from the center of an I-beam., 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange
Model: BLN-B3050-2X4PLN
Eaton B-Line series beam clamps, Suspendes hanger rod from the center of an I-beam., 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain
B-LINE
$118.63
$92.59
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel
Manufacturer Resources
Product Specs
- Application:
- Suspends hanger rod from I-beam
- Beam Flange Width:
- .5 in
- Certifications:
- cULus Listed
- Load Capacity:
- 1000 lb
- Product Height:
- 2.125 in
- Product Length Depth:
- 1.375 in
- Product Weight:
- 1.22 lb
- Product Width:
- .625 in
- Thread Rod Size:
- 1/2"-13
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
- Product Material:
- Steel
B-LINE B3050-2X5PLN – Frequently Asked Questions
1) What size threaded rod does this Eaton B-Line beam clamp take?
It is tapped for 1/2 inch-13 threaded rod. That is the standard coarse thread on 1/2 inch all-thread, so common trapeze and pipe hanger rod threads straight in with no adapter.
2) Is the B-Line B3050 beam clamp UL listed for electrical support?
It is cULus Listed, so it carries both US and Canadian recognition, which is what an inspector on a commercial electrical job typically wants to see on conduit and cable tray supports.
3) Is this beam clamp galvanized or plain steel, and can I use it outdoors?
The B3050-2X5PLN is plain steel with no protective coating, which makes it a dry indoor part. For exterior, damp, or corrosive locations you want an electro-galvanized or hot dip galvanized version of the same clamp instead, because bare steel will rust at the beam contact and at the rod threads.
4) Do I need to drill or weld the beam to hang conduit from it?
No. This is a clamp-on support, which is the point of it: it grips the I-beam flange and gives you a 1/2"-13 threaded connection for hanger rod, so there is no field drilling or welding of structural steel. That also means the support can be relocated later without leaving holes in the beam.
5) What else do I need to order with a B-Line beam clamp to finish the hanger?
The clamp is the beam-end connection only. You still need the 1/2 inch-13 threaded rod cut to length, a nut and washer at the clamp, and whatever terminates the bottom of the rod, a conduit hanger, a trapeze channel with rod nuts, or a pipe clamp. Order one beam clamp per rod.
6) How much room does the B3050 beam clamp take up on the beam?
Compact. The body measures 2.125 in height, 1.375 in length/depth, and .625 in width, so it sits tight to the flange edge and clears adjacent hangers on close rod spacing. Each clamp weighs 1.22 lb, which matters when you are adding up dead load on a long trapeze run.
7) Can I use this beam clamp to hang plumbing pipe, or is it electrical only?
It is catalogued for electrical work but the clamp itself is load-rated hardware, 1000 lb on 1/2 inch-13 rod, so mechanical and plumbing trades use the same style of beam clamp for pipe hangers and trapeze supports. The limits are the 1/2 inch flange width it fits and the 1000 lb rating, not the trade.
How fast can I get the B-LINE B3050-2X5PLN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3050-2X5PLN come with a warranty?
Absolutely. The B-LINE B3050-2X5PLN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3050-2X5PLN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3050-2X5PLN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.