Eaton B-Line series cable support fasteners, Beams, 1" Height, 1" Length, 1" Width, 0.042lbs, Cable to beam fasteners, 2 Max runs, Vertical fastener
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Number Of Runs Max:
- 2
- Product Category:
- Beams
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .08 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Other Fasteners
- Product Type:
- Cable to beam fasteners
- Product Details:
- Cable to beam fasteners
- Product Style:
- Vertical fastener
- Product Length:
- 1 in
- Application:
- Attaches MC, AC, sizes 14/2 - 10/3 or 0.38 inch FMC
B-LINE BX4M-C1 – Frequently Asked Questions
1) What cable sizes does the B-Line BX4M-C1 beam fastener hold?
The BX4M-C1 attaches MC or AC cable in sizes 14/2 through 10/3, or 0.38 inch FMC. Anything larger than 10/3 MC/AC needs a different clip in the series.
2) How many cable runs can one BX4M-C1 clip support?
Two runs maximum per clip. If you are running three or more MC cables along the same beam flange, plan on additional clips or a multi-run fastener rather than doubling up on this one.
3) Do I need screws or anchors to install this beam clip?
No fasteners or drilling. The BX4M-C1 is a clip-on beam fastener, so it snaps to the flange edge and the cable is retained by the clip itself. That is the point of this style over a strap and screw, which would mean drilling structural steel.
4) Is this B-Line cable clip UL listed for electrical work?
Yes, the BX4M-C1 beam fastener is UL/CUL listed, which is what most inspectors and institutional specs want to see on cable support hardware in commercial buildings.
5) Does the BX4M-C1 support cable vertically or horizontally off the beam?
It is a vertical fastener, so the cable is carried in the vertical orientation relative to the beam flange it clips onto. If your run needs to sit flat against the underside of the flange, look for a horizontal-style clip in the same B-Line beam family instead.
6) Can I use the BX4M-C1 to support flexible metal conduit?
Yes, for 0.38 inch FMC specifically. It also takes MC and AC cable from 14/2 to 10/3. Larger trade sizes of FMC will not seat in this clip.
7) How big is the BX4M-C1 clip and what does it weigh?
It is a compact clip at 1 inch height, 1 inch length, and 1 inch width, weighing .08 lb. Small enough to work in tight bar joist and flange spacing, and light enough that a box of them is easy to carry up a lift.
8) What is the exact part number to order this B-Line beam clip?
Order by manufacturer part number BX4M-C1, Eaton B-Line series. It is the single-model cable-to-beam vertical fastener rated for two runs of 14/2 to 10/3 MC or AC.
How fast can I get the B-LINE BX4M-C1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BX4M-C1 come with a warranty?
Absolutely. The B-LINE BX4M-C1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BX4M-C1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BX4M-C1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.