Eaton B-Line series clevis hanger, 0.75" height, 3.75" length, 2.25" width, Steel, J-hanger for pipe or conduit, Wall mounting, Type 5, Zinc chromate, 3/8-16" rod size
Manufacturer Resources
Product Specs
- Application:
- B3151 shield side hole allows for wall mount
- Certifications:
- Not Applicable
- Mounting Method:
- Wall
- Product Height:
- .75 in
- Product Length Depth:
- 3.75 in
- Product Weight:
- .19 lb
- Product Width:
- 2.25 in
- Department:
- Electrical
- Product Type:
- Type 5
- Product Model:
- J-hanger for pipe or conduit
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Type 5
- Product Material:
- Steel
B-LINE B3690-1 ZN – Frequently Asked Questions
1) What rod size does the Eaton B-Line B3690-1 J-hanger take?
The B3690-1 ZN J-hanger is made for 3/8-16 threaded rod. If your trapeze or drop rod is 1/2-13, this is the wrong size hanger and you need the matching larger J-hanger instead.
2) Can this B-Line J-hanger be mounted to a wall instead of hung from rod?
Yes. The B3690-1 is set up for wall mounting, using the B3151 shield side hole to take the fastener into the wall. That makes it usable where you cannot drop rod from the deck and need to run pipe or conduit tight along a vertical surface.
3) Is the yellow zinc chromate finish on this B-Line hanger okay for outdoor or wet locations?
Yellow zinc chromate over steel is a light-duty corrosion coating meant for dry interior work, mechanical rooms, and concealed runs. For exterior, wash-down, or corrosive service, specify a hot dip galvanized or stainless hanger rather than the zinc chromate B3690-1.
4) Should I use a J-hanger or a clevis hanger for a single conduit run?
A J-hanger like the B-Line B3690-1 cradles a single pipe or conduit from one rod or one wall fastener, so it is the quicker, lower-part-count choice for individual runs. A full clevis hanger is the one to specify when you need the pipe fully captured top and bottom and adjustable at the rod, typically on larger plumbing lines. For multiple parallel conduits, skip both and run a trapeze on strut.
5) Does the B-Line B3690-1 hanger come with the rod, nut, or wall anchor?
No. What ships is the steel J-hanger itself. The 3/8-16 threaded rod, nut, and any wall anchor or shield for the side hole are separate line items you need to add to finish the job.
6) Is the B-Line B3690-1 J-hanger UL listed or otherwise certified?
No certification is carried on the B3690-1 J-hanger. If your spec or inspector requires a listed support assembly, verify the requirement against the approved product list for your jurisdiction before you commit to this hanger.
How fast can I get the B-LINE B3690-1 ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3690-1 ZN come with a warranty?
Absolutely. The B-LINE B3690-1 ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3690-1 ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3690-1 ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.