You may also like
Eaton B-Line series clevis hanger, Steel, Electro-galvanized, 3/8"-16 rod size, Clevis hanger
Manufacturer Resources
Product Specs
- Certifications:
- cULus Listed
- Product Height:
- 7.38 in
- Product Length Depth:
- 1.25 in
- Product Weight:
- .235 lb
- Product Width:
- 4.25 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Hangers
- Product Type:
- Clevis hanger
- Product Finish:
- Pre-galvanized
- Product Details:
- Clevis hanger
- Product Material:
- Steel
B-LINE FIG 1NFPA-4-EG – Frequently Asked Questions
1) What rod size does the B-Line FIG 1NFPA-4-EG clevis hanger take?
The FIG 1NFPA-4-EG takes a 3/8"-16 threaded rod. That is the standard coarse thread on 3/8 inch all-thread, so it drops straight onto common 3/8 inch rod stock without an adapter or reducing nut.
2) Does the B-Line clevis hanger come with the threaded rod and anchor?
No. The FIG 1NFPA-4-EG ships as the clevis hanger itself, with its cross bolt and nut. You supply the 3/8"-16 threaded rod cut to length, the rod nut, and whatever overhead attachment the structure calls for, such as a beam clamp or a concrete insert.
3) Can a B-Line electro-galvanized clevis hanger be used outdoors or in a wet area?
The hanger is steel with a pre-galvanized finish. That coating suits dry interior and normally protected mechanical spaces. For exposed exterior runs, pooled moisture, or corrosive process areas, step up to a hot-dip galvanized or stainless clevis instead, since electro-galvanizing is a thin coating.
4) How much space do I need around the pipe to install this clevis hanger?
Allow for a hanger measuring 7.38 inches in height, 4.25 inches in width, and 1.25 inches in length/depth. The height is the critical one when you are working in a tight ceiling cavity, since that is the swing of the strap plus rod nut clearance above the pipe.
5) Should I use a clevis hanger or a split ring hanger for a horizontal pipe run?
A clevis like the B-Line FIG 1NFPA-4-EG carries the pipe in a bolted two-piece strap off a single vertical rod, so it takes the pipe load squarely and is what most sprinkler and mechanical specs call for on horizontal runs. A split ring or swivel ring is faster to close around pipe in tight quarters but is generally spec'd for lighter service. If the drawing says clevis, the ring is not a substitution.
How fast can I get the B-LINE FIG 1NFPA-4-EG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FIG 1NFPA-4-EG come with a warranty?
Absolutely. The B-LINE FIG 1NFPA-4-EG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FIG 1NFPA-4-EG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FIG 1NFPA-4-EG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.