Eaton B-Line series conduit support fasteners, Beams, 1" Height, 1" Length, 1" Width, 0.085lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Conduit to beam fasteners, .5" Max mount size, 25 lbs load capacity
Manufacturer Resources
Product Specs
- Application:
- Supports conduit and electrical boxes
- Certifications:
- UL/CUL listed
- Load Capacity:
- 25 lbs
- Mounting Dimensions Max:
- 0.5
- Product Category:
- Beams
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .085 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit to beam fasteners
- Product Size:
- Conduit size: 0.75 inch EMT, 0.5 inch IMC, Rigid
- Product Details:
- Conduit to beam fasteners
B-LINE BP-12-C1 – Frequently Asked Questions
1) What conduit sizes does the B-Line BP-12-C1 beam clamp fastener hold?
The BP-12-C1 takes 3/4 inch EMT, or 1/2 inch IMC and rigid conduit. Those are the only trade sizes it is sized for, so 1/2 inch EMT or 3/4 inch rigid will not seat correctly in it.
2) What thickness of beam flange will this B-Line conduit-to-beam fastener clip onto?
Maximum mounting size is 1/2 inch, so the clip grips flange or edge material up to 1/2 inch thick. Anything thicker than that needs a different clamp. Overall the body is 1 x 1 x 1 inch, so it fits tight against the steel without eating up clearance.
3) How much weight can a BP-12-C1 conduit beam clamp carry?
Rated for 25 lbs. That covers a run of 3/4 inch EMT at normal support spacing, but if you are hanging multiple raceways, a box plus conduit, or filled rigid over a long span, add supports or move to a strap-and-strut arrangement rather than loading one clip past rating.
4) Can I use this clip to hang an electrical box off a beam, or is it conduit only?
Both. The BP-12-C1 is listed for supporting conduit and electrical boxes, within the same 25 lb capacity. Weight of the box plus device and whip counts toward that limit.
5) Do I need any screws or anchors to install the BP-12-C1?
No. It is a clip-on beam fastener, so it snaps over the flange edge up to 1/2 inch thick and holds the conduit without drilling, welding, or anchors. That is the reason it gets used on open bar joist and steel ceilings where you cannot drill.
6) Which B-Line part number do I order, and how light is it for stocking a bucket of them?
Order by MPN BP-12-C1 from the Eaton B-Line series. Each one weighs .085 lb, so a few hundred add almost nothing to a van or a stock shelf, which is why electricians buy them by the box for repetitive 3/4 inch EMT runs.
How fast can I get the B-LINE BP-12-C1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BP-12-C1 come with a warranty?
Absolutely. The B-LINE BP-12-C1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BP-12-C1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BP-12-C1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.