Eaton B-Line series conduit support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.05lbs, Conduit size: 1.5", Guide-Rite conduit to beam fasteners, .31" Min mount size, .5" Max mount size
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Mounting Dimensions Max:
- 0.5
- Mounting Dimensions Min:
- 0.31
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .095 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Length:
- 1 in
B-LINE BG-24-E-5-8 – Frequently Asked Questions
1) What beam flange thickness does the B-Line BG-24-E-5-8 Guide-Rite conduit clip fit?
The BG-24-E-5-8 clamps onto beam flange edges from 0.31 in up to 0.5 in thick. If the flange on your beam, bar joist or purlin is thicker than half an inch, this clip will not seat and you need a heavier beam clamp instead.
2) What size conduit does the Eaton B-Line BG-24 Guide-Rite beam fastener hold?
It is sized for 1-1/2 in conduit run to a beam. Ordering it for a different trade size means the conduit will either not snap in or will sit loose, so match the clip to the run rather than to the beam.
3) Is the B-Line Guide-Rite beam clip UL listed for electrical work?
Yes, it is UL/CUL listed, which is what an inspector will look for on a commercial or institutional conduit support. That covers both US and Canadian jobs.
4) Does this conduit-to-beam clip need drilling, welding or any other hardware?
No. The Guide-Rite BG-24-E-5-8 is a one-piece flange clip that hooks over the beam edge, so there is no drilling, welding or threaded rod to buy. At .095 lb it goes up by hand overhead, which is why electricians use these for long horizontal runs across open steel.
5) Can I standardize on one Guide-Rite clip for every conduit run in the building?
No. The Guide-Rite line is sized per conduit trade size and per flange range. The BG-24-E-5-8 covers 1-1/2 in conduit on flanges 0.31 to 0.5 in. Other conduit sizes on the job need their matching Guide-Rite part, so take off quantities by size before you order.
6) How much room does the BG-24 beam fastener take up around the conduit?
It is a compact clip, 1 in high by 1 in long by 1 in wide overall. That matters in tight plenums and between joists where a strap and rod assembly would not clear.
How fast can I get the B-LINE BG-24-E-5-8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BG-24-E-5-8 come with a warranty?
Absolutely. The B-LINE BG-24-E-5-8 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BG-24-E-5-8?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BG-24-E-5-8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.