Eaton B-Line series conduit support fasteners, Conduit and cable, 0.28lbs, Trade size: 6, Conduit size: 2.5" EMT, 2.5" Rigid, Conduit hangers, .5" Min, 4" Max mount size, 400 lbs load capacity, Conduit hangers, Zinc plated
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Load Capacity:
- 400 lbs
- Mounting Dimensions Max:
- 4
- Mounting Dimensions Min:
- 0.5
- Product Category:
- Conduit and cable
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .28 lb
- Product Width:
- 1 in
- Special Features:
- Conduit hangers
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit hangers
- Product Size:
- Trade size: 6, Conduit size: 2.5 inch EMT, 2.5 inch Rigid
- Product Details:
- Conduit hangers
B-LINE BL1460 – Frequently Asked Questions
1) Will the B-Line BL1460 conduit hanger fit 2-1/2 inch EMT and 2-1/2 inch rigid conduit?
Yes. The BL1460 is sized for trade size 6, which covers 2-1/2 inch EMT and 2-1/2 inch rigid conduit. One hanger per support point on either raceway type, so you don't need to change parts when a run transitions from EMT to rigid at the same diameter.
2) What beam or flange thickness can a BL1460 conduit hanger clamp onto?
Mounting range runs from 0.5 inch minimum to 4 inch maximum, so it grips anything from a thin flange up to a 4 inch structural member. Below 1/2 inch it won't seat properly.
3) Is the B-Line BL1460 conduit hanger UL listed for electrical inspection?
It carries a UL/CUL listing, which is what an inspector or a spec writer on an institutional job looks for on conduit support hardware. The CUL side covers Canadian installations as well.
4) Can I use this hanger for smaller conduit like 3/4 inch EMT?
No. This one is trade size 6, built to the 2-1/2 inch EMT and 2-1/2 inch rigid diameter. A smaller raceway will sit loose in it. Order the B-Line conduit hanger in the trade size that matches your conduit.
5) Is this conduit hanger galvanized or plated for corrosion resistance?
The BL1460 is zinc plated. That suits dry interior work, mechanical rooms and ceiling spaces. For exterior, wet locations or corrosive environments, specify a hot dip galvanized or stainless support instead.
6) Do I need anything else to install the BL1460, or is the fastener included?
It is the hanger itself, a conduit support fastener for conduit and cable. The anchor, bolt or screw into your structure is selected to suit the substrate and is ordered separately, along with any strut or channel if you are trunking multiple runs.
How fast can I get the B-LINE BL1460 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BL1460 come with a warranty?
Absolutely. The B-LINE BL1460 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BL1460?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BL1460 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.