B-Line Eaton series conduit su...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8,571.86
Image coming soon

B-Line Eaton series conduit support fasteners, Conduit and cable, 0.365lbs, Trade size: 8, Conduit size: 3.5" EMT, 3.5" Rigid, Stainless steel conduit

(No reviews yet) Write a Review

Model: BL1480 SS4

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8,571.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series conduit support fasteners, Conduit and cable, 0.365lbs, Trade size: 8, Conduit size: 3.5" EMT, 3.5" Rigid, Stainless steel conduit hangers, .5" Min, 4" Max mount size, Stainless steel type 304

Manufacturer Resources

Product Specs

Application:
Stainless steel conduit hangers
Certifications:
UL/CUL listed
Mounting Dimensions Max:
4
Mounting Dimensions Min:
0.5
Product Category:
Conduit and cable
Product Height:
1 in
Product Length Depth:
1 in
Product Weight:
.365 lb
Product Width:
1 in
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Conduit Accessories
Product Type:
Stainless steel conduit hangers
Product Size:
Trade size: 8, Conduit size: 3.5 inch EMT, 3.5 inch Rigid
Product Details:
Stainless steel conduit hangers
Product Material:
Steel
Product Length:
1 in

B-LINE BL1480 SS4 – Frequently Asked Questions

1) Will the B-Line BL1480 SS4 hanger fit 3-1/2 inch EMT and 3-1/2 inch rigid conduit?
Yes. The BL1480 SS4 is sized for trade size 8 hardware with 3-1/2 inch EMT and 3-1/2 inch rigid conduit. Both conduit types are covered by the same hanger, so you do not need a separate part number for rigid versus EMT at that diameter.
2) Is the BL1480 SS4 conduit hanger actually stainless, and which grade?
It is a stainless steel conduit hanger in type 304 stainless. That is the grade electricians normally specify for damp, washdown, coastal, food-processing and exterior runs where plain or plated steel would rust out. Note the spec table also carries a generic Steel material entry, so treat 304 stainless as the construction called out for this part.
3) What size structure can I mount this B-Line conduit hanger to?
The mounting range runs from a 0.5 inch minimum to a 4 inch maximum. That covers small beam flanges, angle, and channel up to 4 inches. If the member you are hanging from is wider than 4 inches, this hanger will not close on it and you need a different support method such as a beam clamp sized for the flange.
4) Is this conduit hanger UL listed for an inspected commercial job?
Yes, the BL1480 SS4 is UL/CUL listed, so it carries recognition for both US and Canadian installations. That is the line an inspector or a spec writer on an institutional job typically wants to see on conduit support hardware.
5) I need the exact part number to order 3-1/2 inch stainless conduit hangers from Eaton B-Line.
Order Eaton B-Line part BL1480 SS4. The SS4 suffix is the type 304 stainless version. It is a single catalog number covering both 3-1/2 inch EMT and 3-1/2 inch rigid, with no finish or size options to specify.
6) Should I use a stainless hanger like this or a standard plated steel one for an outdoor conduit run?
Go stainless where corrosion is the failure mode. The BL1480 SS4 is type 304 stainless, which holds up in wet, coastal, chemical wash and exterior exposure. Plated or pre-galvanized hangers are the cheaper choice for dry interior work, but on a rooftop, a pool room, a car wash or a waterfront building they are usually the first thing on the run to fail. Matching the hanger to the conduit material also avoids dissimilar-metal problems on a stainless or aluminum run.
7) Can I use this hanger for cable as well as conduit?
It is catalogued for conduit and cable support, so it is used to fasten both conduit runs and cable to structure. Sizing still governs: it is built around 3-1/2 inch EMT and rigid diameters, so a cable bundle needs to sit in that same range for the hanger to close properly.
How fast can I get the B-LINE BL1480 SS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BL1480 SS4 come with a warranty?
Absolutely. The B-LINE BL1480 SS4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BL1480 SS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BL1480 SS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!