Eaton B-Line series conduit support fasteners, Hangers, 1" Height, 1" Length, 1" Width, 0.19lbs, Conduit size: 1.25" EMT, Deck hanger bracket, 100 lbs load capacity
Manufacturer Resources
Product Specs
- Application:
- Supports conduit or pipe up to 1.5 inch diameter
- Certifications:
- UL/CUL listed
- Load Capacity:
- 100 lbs
- Product Category:
- Hangers
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .19 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Deck hanger bracket
- Product Size:
- Conduit size: 1.25 inch EMT
- Product Details:
- Deck hanger bracket
B-LINE BL1425-DH – Frequently Asked Questions
1) What conduit size does the B-Line BL1425-DH deck hanger fit?
The BL1425-DH is sized for 1-1/4 inch EMT. The broader application rating covers conduit or pipe up to 1.5 inch diameter, so it will take 1-1/4 EMT as its nominal size within that range. If you are running 1/2 or 3/4 EMT, order the matching size in the series rather than this one.
2) How much weight will a B-Line 1-1/4 inch EMT deck hanger bracket hold?
Rated at 100 lbs load capacity. That is the hanger's rating only, not the deck or the fastener into it, so your anchorage into the steel deck or concrete has to be good for at least as much.
3) Is the B-Line BL1425-DH conduit hanger UL listed for electrical work?
Yes, the BL1425-DH carries a UL/CUL listing, which is what an inspector or a spec on an institutional job usually wants to see on conduit support hardware.
4) What is a deck hanger bracket used for compared with a strut clamp or a one-hole strap?
A deck hanger like the BL1425-DH attaches the conduit run up at the deck overhead, so the raceway hangs from the structure rather than being clamped flat to a wall or to a piece of strut. Use a one-hole strap or strut clamp when you have a surface to fasten to; use the deck hanger when the only thing above you is the deck itself and you need the conduit supported off it.
5) Can I use this B-Line hanger on rigid pipe instead of EMT?
The application rating covers conduit or pipe up to 1.5 inch diameter, so it is not EMT-only as a matter of what it will physically hold. The part is nominally sized for 1-1/4 inch EMT, so check the actual outside diameter of your rigid or IMC against that before you commit a whole run to it.
6) What part number do I order for the Eaton B-Line 1-1/4 inch EMT deck hanger?
Order it as BL1425-DH, an Eaton B-Line series part. That single model is the whole offering here, so there is no finish or size suffix to pick.
How fast can I get the B-LINE BL1425-DH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BL1425-DH come with a warranty?
Absolutely. The B-LINE BL1425-DH is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BL1425-DH?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BL1425-DH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.