You may also like
B-Line Eaton series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.09lbs, Conduit size: 1" EMT, 0.75" IMC, Rigid, Push type
Model: BLN-BP-16-B5
Eaton B-Line series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.09lbs, Conduit size: 1" EMT, 0.75" IMC, Rigid, Push type conduit to stud fastener, Push-type design
B-LINE
$810.13
B-Line Eaton series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.05lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Conduit/
Model: BLN-BP-12-H7
Eaton B-Line series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.05lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Conduit/Cable supports
B-LINE
$605.66
B-Line Eaton series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.085lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Push ty
Model: BLN-BP-12-B5
Eaton B-Line series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.085lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Push type conduit to stud fastener, Push-type design
B-LINE
$771.54
B-Line Eaton series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.065lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Push ty
Model: BLN-BP-12-B1
Eaton B-Line series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.065lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Push type conduit to stud fastener
B-LINE
$626.89
B-Line Eaton series conduit support fasteners, Hangers, 1" Height, 1" Length, 1" Width, 0.057lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Push-type
Model: BLN-BP-12-F13
Eaton B-Line series conduit support fasteners, Hangers, 1" Height, 1" Length, 1" Width, 0.057lbs, Conduit size: 0.75" EMT, 0.5" IMC, Rigid, Push-type fastener, 25 lbs load capacity
B-LINE
$644.24
Eaton B-Line series conduit support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.07lbs, Conduit size: 1" EMT, 0.75" IMC, Rigid, Push type conduit to stud fastener
Manufacturer Resources
Product Specs
- Application:
- Attaches with screws to metal studs
- Certifications:
- UL/CUL listed
- Product Category:
- Wall studs
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .07 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Push type conduit to stud fastener
- Product Size:
- Conduit size: 1 inch EMT, 0.75 inch IMC, rigid
- Product Details:
- Push type conduit to stud fastener
- Product Length:
- 1 in
B-LINE BP-16-B1 – Frequently Asked Questions
1) What conduit sizes does the B-Line BP-16-B1 push type fastener hold?
The BP-16-B1 takes 1 inch EMT, or 3/4 inch IMC and rigid conduit. Those are different trade sizes but their outside diameters land in the same range, which is why one clip covers both. Running 3/4 inch EMT or 1 inch rigid instead means a different clip number in the B-Line BP series.
2) Can I use this B-Line conduit clip on metal studs, or is it for wood framing?
Metal studs. The BP-16-B1 is made to attach with screws to metal studs, and it is the fastener that holds the conduit to the stud rather than to the deck or wall surface. For wood framing you want a strap or a one-hole clamp fastened with a wood screw instead.
3) Is the B-Line BP-16-B1 conduit fastener UL listed for electrical work?
It carries a UL/CUL listing, which is what an inspector or a spec on a commercial or institutional job normally calls for on conduit support hardware. The CUL side covers Canadian installations under the same listing.
4) How does a push type conduit clip install compared to a two-piece strap?
With a push type clip like the BP-16-B1 you screw the clip to the metal stud once, then push the conduit into it by hand. No second fastener, no holding the pipe while you start a screw. A two-hole strap needs the pipe positioned and two fasteners driven per support point, so on a long homerun through studded walls the push clip is much faster per hole.
5) Do I need screws with the B-Line BP-16-B1, or does it snap onto the stud?
The clip fastens to the metal stud with screws, so plan on a self-drilling framing screw at each support point. The push action is for the conduit, not for the stud attachment.
6) What part number do I order for the B-Line 1 inch EMT push clip?
Order it as B-Line (Eaton) BP-16-B1. That is the single model for this clip, covering 1 inch EMT and 3/4 inch IMC or rigid.
How fast can I get the B-LINE BP-16-B1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BP-16-B1 come with a warranty?
Absolutely. The B-LINE BP-16-B1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BP-16-B1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BP-16-B1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.