Eaton B-Line series datacomm and low voltage support fasteners, 360° rotation, Cable to beam fastener, Beam mount, 1/2" Flange thickness, 2" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Hook Size:
- 2 in
- Load Capacity:
- 30 lb
- Mounting Dimensions Max:
- 1/2"
- Number Of J Hooks:
- 1
- Product Height:
- 6.63 in
- Product Length Depth:
- 2.38 in
- Product Weight:
- .509 lb
- Product Width:
- 1.62 in
- Special Features:
- Beam mount
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Other Fasteners
- Product Type:
- Cable to beam fastener
- Product Finish:
- Pre-galvanized
- Product Details:
- Cable to beam fastener
- Product Material:
- Steel
B-LINE BCH32-C2 – Frequently Asked Questions
1) What beam flange thickness does the B-Line BCH32-C2 J-hook clamp fit?
The BCH32-C2 cable-to-beam fastener clamps onto flanges up to 1/2 inch thick. That covers the bar joist and structural beam flanges you'd typically run low voltage cable along. If your flange is thicker than 1/2 inch, this clamp won't seat on it.
2) How much cable can a 2 inch B-Line J-hook hold?
Rated load is 30 lbs per hook, with a 2 inch hook opening. The 2 inch size is the common choice for bundles of Cat5e/Cat6 runs in a commercial ceiling; the 30 lb rating is the limit you design the spacing of your supports around.
3) Is this B-Line cable hook UL listed for low voltage cable support?
Yes, the BCH32-C2 is UL/CUL listed. That matters for inspected commercial datacomm and low voltage installs where the cable support method has to be a listed product rather than field-improvised strapping.
4) Can the hook be turned to change cable direction after it's mounted on the beam?
Yes. The assembly gives 360 degree rotation, so once the clamp is set on the flange you can swing the hook to line up with the cable pathway instead of being locked to the beam's orientation. Useful when the run crosses the structure at an angle.
5) Do I need any extra anchors or fasteners to install the B-Line BCH32-C2?
No drilling or anchors. It is a beam mount clamp, so it attaches directly to a flange up to 1/2 inch thick, carrying one 2 inch J-hook. Nothing gets shot into the structure, which is what makes it acceptable where you cannot penetrate the steel.
6) Is a pre-galvanized steel J-hook suitable for a damp or unconditioned space?
The BCH32-C2 is steel with a pre-galvanized finish, which is the standard interior/protected-environment finish for cable support hardware. It is fine for plenums, unconditioned attics and interior structural steel. For continuously wet or corrosive environments you want a stainless or hot-dip alternative instead.
How fast can I get the B-LINE BCH32-C2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH32-C2 come with a warranty?
Absolutely. The B-LINE BCH32-C2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH32-C2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH32-C2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.