B-Line Eaton series data and l...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,874.38
B-Line Eaton series data and low support fasteners, 360° rotation, Cable to beam fastener, Beam mount, 1/8" Min flange thickness, 5/8" Max flange thi

B-Line Eaton series data and low support fasteners, 360° rotation, Cable to beam fastener, Beam mount, 1/8" Min flange thickness, 5/8" Max flange thi

(No reviews yet) Write a Review

Model: BCH12-C442
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,874.38
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series datacomm and low voltage support fasteners, 360° rotation, Cable to beam fastener, Beam mount, 1/8" Min flange thickness, 5/8" Max flange thickness, 3/4" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs

Manufacturer Resources

Product Specs

Certifications:
UL/CUL listed
Hook Size:
.75 in
Load Capacity:
30 lb
Mounting Dimensions Max:
5/8"
Mounting Dimensions Min:
1/8"
Number Of J Hooks:
1
Product Height:
3.18 in
Product Length Depth:
1 in
Product Weight:
.39 lb
Product Width:
.88 in
Special Features:
Beam mount
Department:
Electrical
Product Group:
Fasteners
Product Subgroup:
Other Fasteners
Product Type:
Cable to beam fastener
Product Finish:
Pre-galvanized
Product Details:
Cable to beam fastener
Product Material:
Steel

B-LINE BCH12-C442 – Frequently Asked Questions

1) Will the B-Line BCH12-C442 J-hook clamp onto my beam flange, and what flange thickness does it handle?
The BCH12-C442 beam clamp grips flanges from 1/8 inch up to 5/8 inch thick, so it covers typical bar joist angle iron through heavier structural beam flanges. Measure the flange edge where you intend to clamp; anything thinner than 1/8 or thicker than 5/8 is outside its range and you need a different mounting method.
2) Is this J-hook beam clamp acceptable for a low voltage install that has to pass inspection?
The BCH12-C442 is UL/CUL listed, which is what inspectors look for on an independent support system carrying data and low voltage cable. It is a dedicated cable support, not a wire or grid tie, so it satisfies the requirement that communications cable be supported independently of the ceiling system.
3) Does the B-Line BCH12-C442 cable hanger swing so I can aim the hook down the cable run?
It rotates a full 360 degrees, so once the clamp is set on the flange you can turn the hook to line up with the direction of the cable pathway instead of being stuck with whatever orientation the beam gives you. Useful where the run crosses the structure at an angle.
4) Will a pre-galvanized steel J-hook hold up in a parking garage or unconditioned warehouse?
The body is steel with a pre-galvanized finish, which is meant for dry interior and protected areas. It handles normal plenum, warehouse, and ceiling-space conditions. For wash-down, coastal, or outdoor exposure, specify a hot-dip galvanized or stainless support instead.
5) Do I need any extra hardware to install the BCH12-C442 cable to beam fastener?
No anchors, screws, or threaded rod are required. It clamps directly to the beam flange, so the hook and the clamp arrive as one assembly and the install is a tool-on-the-flange job. Order one per support point along the run.
How fast can I get the B-LINE BCH12-C442 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH12-C442 come with a warranty?
Absolutely. The B-LINE BCH12-C442 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH12-C442?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH12-C442 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!