You may also like
B-Line Eaton series data and low support fasteners, Cable to beam fastener, Beam mount, 3/4" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs,
Model: BLN-BCH12-C1
Eaton B-Line series datacomm and low voltage support fasteners, Cable to beam fastener, Beam mount, 3/4" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
B-LINE
$1,533.36
B-Line Eaton series data and low support fasteners, Cable to beam fastener, Beam mount, 4" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, S
Model: BLN-BCH64-C1
Eaton B-Line series datacomm and low voltage support fasteners, Cable to beam fastener, Beam mount, 4" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
B-LINE
$3,678.50
B-Line Eaton series data and low support fasteners, Cable to beam fastener, Beam mount, 2" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, S
Model: BLN-BCH32-C1
Eaton B-Line series datacomm and low voltage support fasteners, Cable to beam fastener, Beam mount, 2" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
B-LINE
$2,274.13
B-Line Eaton series data and low support fasteners, Cable hook, Wall mount, 1-5/16" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
Model: BLN-BCH21
Eaton B-Line series datacomm and low voltage support fasteners, Cable hook, Wall mount, 1-5/16" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
B-LINE
$939.54
$7.04
B-Line Eaton series data and low support fasteners, Cable to wire and rod fastener, Cable mount, 1-5/16" Hook, 1 J-hook, Pre-galvanized, Load capacit
Model: BLN-BCH21-W2
Eaton B-Line series datacomm and low voltage support fasteners, Cable to wire and rod fastener, Cable mount, 1-5/16" Hook, 1 J-hook, Pre-galvanized, Load capacity of 25 lbs, Steel
B-LINE
$1,646.36
Eaton B-Line series datacomm and low voltage support fasteners, Cable to beam fastener, Beam mount, 1-5/16" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Hook Size:
- 1.31 in
- Load Capacity:
- 30 lb
- Number Of J Hooks:
- 1
- Product Height:
- 5.91 in
- Product Length Depth:
- 1.69 in
- Product Weight:
- .202 lb
- Product Width:
- 1.62 in
- Special Features:
- Beam mount
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Other Fasteners
- Product Type:
- Cable to beam fastener
- Product Finish:
- Pre-galvanized
- Product Details:
- Cable to beam fastener
- Product Material:
- Steel
B-LINE BCH21-C1 – Frequently Asked Questions
1) How much cable can the B-Line BCH21-C1 J-hook hold?
The BCH21-C1 beam-mount J-hook carries up to 30 lb of load on a single 1-5/16 inch hook. That is the limit per hanger, so on a long run space your supports so no one hook takes more than 30 lb of bundled cable weight. The hook itself is steel and weighs about .202 lb.
2) Does the BCH21-C1 cable hanger need a drilled hole or an anchor to install?
No drilling. The BCH21-C1 is a beam-mount fastener, so it clips onto the flange of existing structural steel and the J-hook hangs off it. That is the whole install, which is why it is the common choice in ceilings where you cannot put holes in the structure. If your run is under drilled deck, threaded rod, or wood joists instead of exposed beam flange, this is not the right mount.
3) Is the B-Line BCH21-C1 J-hook UL listed for data cable support?
Yes, the BCH21-C1 is UL/CUL listed. That matters for institutional and inspected work where cable support hardware has to be a listed product rather than improvised support, and CUL covers Canadian jobs on the same part number.
4) Can I run power and data cable in the same B-Line beam J-hook?
This is a single-hook hanger, one 1-5/16 inch J-hook per beam clip, so everything you lay in it shares the same channel. For separation between low voltage data and other circuits, use a separate hanger for each system or go to a multi-hook assembly. The BCH21-C1 is built for datacomm and low voltage support.
5) Is a pre-galvanized J-hook okay for a damp or unconditioned area?
The BCH21-C1 uses a pre-galvanized steel finish, which suits indoor dry and normally unconditioned spaces, plenum runs, and above-ceiling work. For wet exterior, corrosive, or washdown environments, specify a hot-dip galvanized or stainless cable hanger instead of a pre-galvanized one.
How fast can I get the B-LINE BCH21-C1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH21-C1 come with a warranty?
Absolutely. The B-LINE BCH21-C1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH21-C1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH21-C1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.