You may also like
B-Line Eaton series data and low support fasteners, Capacity up to 80 4-pair UTP cat 5e or 2-strand Fiber Optic Cable or 50 CAT6 or 25 CAT6A, Cable h
Model: BLN-BCH32BK
Eaton B-Line series datacomm and low voltage support fasteners, Capacity up to 80 4-pair UTP cat 5e or 2-strand Fiber Optic Cable or 50 CAT6 or 25 CAT6A, Cable hook, Wall mount, 2" Hook, 1 J-hook,...
B-LINE
$1,793.84
B-Line Eaton series data and low support fasteners,Capacity up to 80 4-pair UTP cat 5e or 2-strand Fiber Optic Cable or 50 CAT6 or 25 CAT6A,Cable hoo
Model: BLN-BCH32
Eaton B-Line series datacomm and low voltage support fasteners,Capacity up to 80 4-pair UTP cat 5e or 2-strand Fiber Optic Cable or 50 CAT6 or 25 CAT6A,Cable hook,Wall mount, 2" Hook, 1 J-hook,...
B-LINE
$1,124.37
$6.54
B-Line Eaton series data and low support fasteners, Capacity up to 50 4-Pair UTP Cat 5e or 2-Strand Fiber Optic Cable or 32 CAT6 or 18 CAT6A, Cable H
Model: BLN-BCH21GR
Eaton B-Line series datacomm and low voltage support fasteners, Capacity up to 50 4-Pair UTP Cat 5e or 2-Strand Fiber Optic Cable or 32 CAT6 or 18 CAT6A, Cable Hook, Wall mount, 1-5/16" Hook, 1...
B-LINE
$1,477.51
B-Line Eaton series data and low support fasteners, Capacity up to 300 4-Pair UTP 25 cat 5e or 2-strand Fiber Optic Cable or 185 CAT6 or 98 CAT6A,Cab
Model: BLN-BCH64BW
Eaton B-Line series datacomm and low voltage support fasteners, Capacity up to 300 4-Pair UTP 25 cat 5e or 2-strand Fiber Optic Cable or 185 CAT6 or 98 CAT6A,Cable hook,Wall mount, 1-4" J-hook,Bright...
B-LINE
$3,146.60
B-Line BCH32YL Eaton series datacomm and low voltage support fasteners, Capacity up to 80 4-pair UTP cat 5e or 2-strand Fiber Optic Cable or 50 CAT6 or 25 CAT6A, Cable hook, Wall mount, 1-2" J-hook, Safety yellow, Load capacity of 30 lbs, Steel
Model: BLN-BCH32YL
Eaton B-Line series datacomm and low voltage support fasteners, Capacity up to 80 4-pair UTP cat 5e or 2-strand Fiber Optic Cable or 50 CAT6 or 25 CAT6A, Cable hook, Wall mount, 1-2" J-hook, Safety...
B-LINE
$63.29
$17.36
Eaton B-Line series datacomm and low voltage support fasteners, Capacity up to 80 4-pair UTP cat 5e or 2-strand Fiber Optic Cable or 50 CAT6 or 25 CAT6A, X-hook low friction cable hooks, Wall mount, 1-2" J-hook, Xylan coated, Steel
Manufacturer Resources
Product Specs
- Certifications:
- Contact Manufacturer
- Hook Size:
- 2 in
- Load Capacity:
- 30 lb
- Number Of J Hooks:
- 1
- Product Height:
- 4.31 in
- Product Length Depth:
- 2.38 in
- Product Weight:
- .2 lb
- Product Width:
- 2.25 in
- Special Features:
- Wall mount
- Department:
- Electrical
- Product Group:
- Wiring Accessories
- Product Subgroup:
- Cable Accessories
- Product Type:
- X-hook low friction cable hooks
- Product Details:
- X-hook low friction cable hooks
- Product Material:
- Steel
B-LINE BCH32X – Frequently Asked Questions
1) How many Cat6 or Cat6A cables can the B-Line BCH32X X-hook hold?
The BCH32X carries up to 80 4-pair UTP Cat 5e runs or 2-strand fiber, 50 Cat6, or 25 Cat6A. That drop in count as you move up the categories is normal: Cat6 and especially Cat6A have a larger outside diameter, so the same 2 inch hook opening fills faster. Rated load is 30 lb.
2) Is the B-Line BCH32X cable hook a wall mount or does it hang from threaded rod?
It is a wall mount hook. The BCH32X X-hook attaches to a flat surface, so it suits running cable along a wall or the side of a structural member rather than suspending from rod or beam clamps.
3) What are the dimensions and weight of the B-Line BCH32X X-hook?
Height 4.31 in, width 2.25 in, length/depth 2.38 in, and it weighs .2 lb. The hook opening itself is 2 in. Those numbers matter when you are spacing hooks in a tight plenum or against a joist face and need to know how far the bundle stands off the wall.
4) What is an X-hook and how is it different from a plain J-hook for cable support?
An X-hook is a low friction cable hook: the cradle is shaped so bundles slide in and pull through with less drag on the jacket, which is what protects Cat6A performance when you are pulling long runs by hand. A plain J-hook is a simple open cradle with no low friction profile. The BCH32X is a single-hook wall mount unit, so for each support point you install one hook.
5) How much weight can one B-Line X-hook cable support hold?
30 lb per hook. Divide your bundle weight across the hook spacing you are using and stay inside that figure, and remember the 2 in opening will usually be the limit before the load rating is on Cat6A work.
6) Is the B-Line BCH32X hook coated for corrosion resistance?
It is steel with a Xylan coating. The coating is what gives the cradle its low friction surface for pulling cable, and it covers the steel body.
7) What is the manufacturer part number for this Eaton B-Line X-hook?
BCH32X, from the Eaton B-Line datacomm and low voltage support fastener series. That is the number to quote for the 2 in wall mount X-hook.
How fast can I get the B-LINE BCH32X delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH32X come with a warranty?
Absolutely. The B-LINE BCH32X is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH32X?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH32X from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.