B-Line Eaton series data and l...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,345.50
Image coming soon

B-Line Eaton series data and low support fasteners, Support bar for BCH64 13-5/16" long with .281Ø holes, Multi-tier cable hook kit, 6063-T6 aluminiu

(No reviews yet) Write a Review

Model: BCH-HB64

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,345.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series datacomm and low voltage support fasteners, Support bar for BCH64 13-5/16" long with .281Ø holes, Multi-tier cable hook kit, 6063-T6 aluminium

Manufacturer Resources

Product Specs

Application:
Used with (BCH64) 13-5/16 in length
Certifications:
UL/CUL listed
Product Height:
6.81 in
Product Length Depth:
4.55 in
Product Weight:
.458 lb
Product Width:
2 in
Department:
Electrical
Product Group:
Wiring Accessories
Product Subgroup:
Cable Accessories
Product Type:
Multi-tier cable hook kit
Product Details:
Multi-tier cable hook kit
Product Material:
Aluminum

B-LINE BCH-HB64 – Frequently Asked Questions

1) What exactly is the Eaton B-Line BCH-HB64 support bar used for?
The BCH-HB64 is the support bar in a multi-tier cable hook kit. It is the 13-5/16 inch long bar drilled with .281 diameter holes that the BCH64 cable hooks mount to, so you can stack several hooks on one drop and keep separate cable runs on their own tiers instead of running multiple independent hangers.
2) Will the BCH-HB64 bar work with any B-Line cable hook, or only the BCH64 size?
It is matched to the BCH64 hook at 13-5/16 inch length. The hole pattern and bar length are sized for that hook, so ordering it for a different BCH hook size is the usual mistake. If your drop uses a different hook size, order the support bar built for that size instead.
3) Do I get the cable hooks with the BCH-HB64, or just the bar?
What is described here is the support bar itself, the 13-5/16 inch piece with the .281 holes that the BCH64 hooks attach to. Order the BCH64 hooks separately for each tier you plan to run, plus the rod, clamp or bracket you are hanging the assembly from.
4) Is the B-Line BCH-HB64 cable hook support bar UL listed?
Yes, it carries a UL/CUL listing, which is what an institutional or government spec writer usually needs to see before low voltage support hardware goes into a building. The CUL portion covers Canadian installations as well.
5) What material is the BCH-HB64 support bar made from, and will it hold up in a plenum or damp area?
The bar is aluminum, specified as 6063-T6 extruded aluminum. That means it will not rust the way a plain steel hanger does, and at .458 lb it adds very little dead load to a threaded rod or beam clamp drop.
6) How much space does a BCH-HB64 multi-tier cable hook assembly take up above the ceiling?
Figure roughly 6.81 x 4.55 x 2 inches for the assembly envelope. In a tight plenum with limited clearance between the ceiling grid and the deck, check that against your available space before you set the drop height, since a multi-tier arrangement stacks hooks vertically.
7) What size hardware goes through the holes in the BCH-HB64 support bar?
The bar is drilled with .281 diameter holes, which is the clearance size for 1/4 inch fasteners. That is the attachment point for mounting the hooks and tying the bar into your rod or bracket.
8) Why use a multi-tier hook bar instead of just adding more J-hooks on separate drops?
One bar on one drop carries several hooks, so you punch and hang far fewer anchors on a large data pull and keep cable categories physically separated on their own tiers. Separate single hooks are the better call when your runs branch in different directions and will not share a common support point.
9) What is the manufacturer part number to order the B-Line multi-tier support bar?
Order it as Eaton B-Line BCH-HB64. That is the part number for the BCH64 support bar, and it is the number to give a distributor so you do not get a hook instead of the bar.
How fast can I get the B-LINE BCH-HB64 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH-HB64 come with a warranty?
Absolutely. The B-LINE BCH-HB64 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH-HB64?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH-HB64 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!