B-Line Eaton series data and l...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,533.34
B-Line Eaton series data and low support fasteners, Yellow, Plastic with steel hook, 2", 1/4"-20" x 7/8", Used for

B-Line Eaton series data and low support fasteners, Yellow, Plastic with steel hook, 2", 1/4"-20" x 7/8", Used for, 100 Pack

(No reviews yet) Write a Review

Model: BRS-32A
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,533.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series datacomm and low voltage support fasteners, Yellow, Plastic with steel hook, 2", 1/4"-20" x 7/8", Used for (BU-9-12, BC 1, BW2, BC442, BH4-F3)

Manufacturer Resources

Product Specs

Compliances:
cULus Listed
Product Diameter:
2 in
Product Height:
2.25 in
Product Weight:
13 lb
Ring Size:
2 in
Ring Thread Size:
1/4-20" x 7/8"
Special Features:
Used for (BU-9-12, BC 1, BW2, BC442, BH4-F3)
Department:
Electrical
Product Color:
Yellow
Product Material:
Steel

B-LINE BRS-32A – Frequently Asked Questions

1) What size cable bundle will a 2 inch B-Line BRS-32A bridle ring hold?
The BRS-32A has a 2 inch ring size, so it supports a bundle of low voltage or datacomm cable up to roughly that 2 inch inside diameter. Overall height is 2.25 inches. For larger bundles you need a bigger ring or a second run of rings, since overfilling the loop defeats the point of supporting the cable instead of pinching it.
2) What thread does the BRS-32A bridle ring use, and what does it screw into?
The stud is 1/4-20 by 7/8 inch, which is the standard machine thread for threaded rod couplings, beam clamps, strut nuts and 1/4-20 inserts in concrete. If your overhead support is 3/8-16 rod or a 3/8 insert, this one will not thread in and you need the 3/8 version instead.
3) Which B-Line accessories is the BRS-32A bridle ring meant to be used with?
Eaton lists it for use with BU-9-12, BC 1, BW2, BC442 and BH4-F3. Those are the hangers, clamps and bracket pieces that give the 1/4-20 stud something to thread into, so if you are ordering rings without an existing threaded support in place, order one of those with them.
4) Is the BRS-32A plastic or steel? I need something that will not chafe data cable.
It is a combination: a yellow plastic saddle on a steel hook. The plastic bearing surface is what sits against the cable jacket, so Cat6 and other low voltage runs are not resting on bare metal edges, while the steel hook carries the load.
5) Can I use a bridle ring like the BRS-32A instead of J-hooks for a low voltage run?
Yes, and the choice comes down to how you are anchoring. A bridle ring threads onto a 1/4-20 point (rod, beam clamp, strut nut) and fully encircles the bundle, so cable cannot jump out of the support. A J-hook is open topped and screws or clips to a surface, which is faster to drop cable into on long horizontal pulls but does not capture it. Vertical drops and anywhere cable could be pushed out of an open hook are where the closed 2 inch ring earns its place.
6) Can I hang electrical conduit or power wiring from these bridle rings?
No. The BRS-32A is a datacomm and low voltage cable support, not a conduit hanger. Use conduit clamps or pipe hangers rated for the raceway you are installing. Keep power and low voltage on separate supports anyway.
7) How many bridle rings come in a box of BRS-32A?
They ship 100 to the pack, at 13 lb for the carton. That is enough to lay out a full corridor or IDF room run in one order, which is how most integrators and electrical contractors buy them.
8) What is the exact part number to order for the 2 inch yellow B-Line bridle ring?
Order Eaton B-Line BRS-32A. That is the 2 inch ring with the 1/4-20 by 7/8 inch stud in yellow.
How fast can I get the B-LINE BRS-32A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BRS-32A come with a warranty?
Absolutely. The B-LINE BRS-32A is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BRS-32A?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BRS-32A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!